Charles Deshler

Glenn, I understand your concern. I almost didnt want to post the pictures because it so cluttered right now. I am building the shop, keeping up with production and most importantly, not heating right now. It normally is nowhere near that crowded and messy, i am very careful with keeping the area clean. That small woodburner has been used, in less space, for many years with no issues.

Do you think a masonary heater like the one in my original post would be the safe bet?
That seems to be all brick, with a J tube inside.
Thank you guys for the inputs

OK, Not sure if thats right but there is a couple pictures of my messy shop. I have just added an 12x 18 addition to the 18x24 main.
I am self employed so i have shoved items around and kept up production while trying to work on the building. Its a wreck. :/

The top Pic:
The white wall is an outside wall, and is about 7.5' tall. That is where i want to exit the building with my Chiminey.
The door you see just goes into my Spray booth and is of no concern for this project. It is self contained/heated
The opening going into the main shop, is 8' x 8'
Stove is in approximate location of where i need to place it for proper clearance. I may build a fire proof insulated shield/wall to protect the wood and get me a few more inches.
I am standing in the outside doorway talking the pictures.

Bottom pic:
The little bit of wall you can see next to the Bandsaw is a closet. 6' x 9'
The opening is 8' x 8'
The room goes back 24' and is 18' wide.
ALL of the items in that pile to the right of the stove will be gone by tomorrow after i clean. The tall grey items are the rest of my roof trim, and need to be installed if not raining.
The walk way is actually more open than i expected it to be.

SO:
I am thinking a small Rocket Heater for efficiency and space savings?? Better clearance?
The building is WELL insulated.

paul wheaton wrote:

Charles Deshler wrote:HI,
I was a backer but have forgotten what i am supposed to get with my pledge. Where can i find this out?

Charles, we have you in our system as "4-DVD set, physical dvds".  So you should get a package in the mail around the end of september!

OK, Thanks Paul. I thought there was something else but i don't remember. I look forward to the DVD's  My new shop is waiting for a heater build!!!

Satamax Antone wrote:Charles, i can't see your pictures. By the look of their address, that's hosted on a mail server. That ought to be private.   Just look bellow your reply, when you reply, there's attachements. Just post your two pics there.

I am not sure i follow ya.

HI,
I was a backer but have forgotten what i am supposed to get with my pledge. Where can i find this out?

OK, Not sure if thats right but there is a couple pictures of my messy shop. I have just added an 12x 18 addition to the 18x24 main.
I am self employed so i have shoved items around and kept up production while trying to work on the building. Its a wreck. :/

The top Pic:
The white wall is an outside wall, and is about 7.5' tall. That is where i want to exit the building with my Chiminey.
The door you see just goes into my Spray booth and is of no concern for this project. It is self contained/heated
The opening going into the main shop, is 8' x 8'
Stove is in approximate location of where i need to place it for proper clearance. I may build a fire proof insulated shield/wall to protect the wood and get me a few more inches.
I am standing in the outside doorway talking the pictures.

Bottom pic:
The little bit of wall you can see next to the Bandsaw is a closet. 6' x 9'
The opening is 8' x 8'
The room goes back 24' and is 18' wide.
ALL of the items in that pile to the right of the stove will be gone by tomorrow after i clean. The tall grey items are the rest of my roof trim, and need to be installed if not raining.
The walk way is actually more open than i expected it to be.

SO:
I am thinking a small Rocket Heater for efficiency and space savings?? Better clearance?
The building is WELL insulated.

I am not sure how to post pics

Picture was HUGE

How do i ad pictures?

Satamax Antone wrote:

Satamax Antone wrote:

Pictures of the workshop could be a good idea too.

Quoting myself!

So would pictures help?  
Maybe a quick video if i can manage. Shop is a wreck and still under construction so we will try for clearity