David Baillie wrote:
That's probably because Ben has sourced them and probably has them for sale. Most people I know start with either an air powered venturi or a series of marine bilge blowers hooked up in series Or a dimmer controlled vaccuum or a battery powered leaf blower... Lots of work arounds. If you check out www.driveonwood.com you can quiz the brain trust there for free and read most posts. there is a paid section but if you are building an imbert style downdraft unit like Ben's style those threads are all on the free side...Andy Marshall wrote:Anybody have suggestions for a blower motor? The one Peterson recommends is only available in batches of 200. He says it must have at least 9" of water lift, but most blowers are rated in CFM. I am running a 500cc generator with a 1-liter hearth ratio configuration, so I assume I will need a secondary blower to make up for the lack of engine suction. In fact, I have found nothing that is rated in water lift. It's funny, going through the book it struck me that Ben has thought of everything. Yet finding this seemingly critical motor has been very difficult.
Thanks!
Andy
Cheers, David