Sebastian VanDeVeire

Yes it is sitting on its back, there is the gasket on the door(pics were taken just after weld process), and the legs have been built for a while. The inside pic shows the spark arrester which is open on all sides( just blocks straight travel to the exhaust) and is also 10 gauge stainless. I tried to upload a video of it during its first burn but the site wouldn't let me upload .mov files

I built my wood stove from 10 gauge stainless steel I have fire brick along the bottom and I have control of the supplied air from a tube I ran through the back . I haven't installed it in the garage as of late but I'm wanting to before winter. This is in no way small so I don't want to have it too far from my wall so does anyone know a basis on distance I could follow to make it a safe install so I don't burn my garage down? I've included a few pictures to try and help you experts have the required information for an educated answer but they don't show how big it is. The dimensions are 3' deep and a 2' diameter. Thanks ahead of time for anyone who takes the time to answer my question. Also if you have any ideas or concerns about how I could make it better or why it will kill my garage feel free to let me know.