Kevin McLean

+ Follow
since Dec 27, 2017
Apples and Likes
Apples
Total received
0
In last 30 days
0
Total given
0
Likes
Total received
1
Received in last 30 days
0
Total given
0
Given in last 30 days
0
Forums and Threads
Scavenger Hunt
expand First Scavenger Hunt

Recent posts by Kevin McLean

I'm working with a nonprofit to design rocket stoves to replace the filthy 3-stone cooking used by billions.  Our goal is a rocket stove that is ultra-affordable and can be made everywhere with local material.  We want any brick maker to be able to easily make these stoves.

We are working on two designs - an L and J rocket stove.

While I'm sure we are far from the final designs, I'll give our latest designs below.

L Rocket Stove
Attached is the latest design.  We are limited to materials that are cheap and locally available everywhere.  So no insulation, no steel, no firewood rack, no ....  Just the clay mix used by local brick makers.  We use a broken brick to elevate the firewood into the fire chamber.  We have tested prototypes of this design and they work pretty well.  Not as well as commercial rocket stoves but much better than 3-stone.

We are testing different sizes for the center hole, different brick heights and additional air holes at the bottom of the bottom brick.

If we are successful in this design, we should be able to give brick makers the pipes for their molds and quickly teach them how to make the 2-brick stoves.  They should be able to make and sell the stoves for under US$1.


J Rocket Stove

We haven't yet tested a prototype of the J rocket stove.  The design is attached.  This is designed for the 11cm pvc pipe and 25x25x10 cm brick mold that one of our volunteers in Africa already has.  I expect that 11cm is too narrow.  I have a number of other concerns about this design, but we'll test it out.  Other volunteers should have access to larger pipes so we can test them later.

All suggestions are welcome.  Again, we hope these can be made without metal, without insulation, without firewood racks, etc..  (Adding insulative material to the clay is preferable but for now we want a design that can be used universally.  Depending one what is available locally, brick makers can add insulation (rice hulls, sawdust) to their clay.)




2 years ago