Self Running Magnet Motor

Are There Any Completed Plans Available  For A Duplication Of The self running free energy "Bowman Permanent Magnet Motor" ? Plastic gears with ratio 2:1, 3 discs, many rod magnets + one initiator magnet. Original was table model demonstrated in 1950 by Engineer. I had long time back without many funds, made design for just the gears as homemade. Appliance COGGED type belt cut and glued inside out on to OD on plastic disc , with cogs facing out will form gear at any ratio. Plastic disc is mounted in spinning drill press, with file against OD. (Stop/start) and test so as COUNTED teeth desired actually fits around touching on the 2 ends, the disc is now round. I used super glue for the 3 discs. Neodymium rods magnets are now surplus and at lower cost instead of alnico as in the original model. I used non magnetic brass and aluminum axle rods with threads put on ends in vice with cut die. Each side of discs require lock washers and non magnetic nuts. Make frame holder with allowance for slots sideways adjustmets. See data internet on the original and other updates. There was a controversey on Internet on how the magnetic poles should be facing years ago. I reduced the friction by eliminating 3 of the ball bearings, and used oilite bronze bushings to match the shafts. Originally I had intended to make several models and mount wire coils on outside , so as power for use as perpetual night lignts.

Is this what you mean Russ?


source

I did find some plans for download on the internet after a search, but didn't have a look since I thought the link might have been dodgy.

It says here that the Sun produces 5×10²³HP; that's about 3.7×10²⁶W, of which 10¹⁵W strikes the Earth. I think.

1 kW per square meter is the rule of thumb I use. It's easy to remember and for mid-latitude locations, if you average it out over a year, it's pretty close to real life.

I used to chased these ideas,  but I gave up and moved to solar panels.

But if you wish to continue, I suggest the following sites:

https://overunity.com

http://amasci.com/freenrg/keely.html

http://www.energeticforum.com/forum/energetic-forum-discussion


I liked the work of Howard Johnson with magnets,   I found it interesting....

I designed a 3d Magnetic Motor years ago. Just it 80% printer and printer died.

I also had created a 3d design of the Water Tornado.

You want to follow Robert Murray-Smith. On YT.

Over 30 following, sites and projects. So much of then are being shutdown or taken. Some have been killed. Some technologies they do not want the people to know about.

What is needed is a full sustainable utility unit.

Basically a Power Center in a Box..
20 foot container. With Power, Water, HVAC, Septic all in one unit.

You build around it and connect to it. And you have Full Sustainable Home.

Craig Lewis wrote:I designed a 3d Magnetic Motor years ago. Just it 80% printer and printer died.

I also had created a 3d design of the Water Tornado.

You want to follow Robert Murray-Smith. On YT.

Over 30 following, sites and projects. So much of then are being shutdown or taken. Some have been killed. Some technologies they do not want the people to know about.

What is needed is a full sustainable utility unit.

Basically a Power Center in a Box..
20 foot container. With Power, Water, HVAC, Septic all in one unit.

You build around it and connect to it. And you have Full Sustainable Home.

I asked Mr. Google about "Bowman Permanent Magnet Motor".

This was what he suggested:

Well, it's a device that's supposed to generate free energy by harnessing the power of magnets. Here's how it's supposed to work: you place two magnets on either side of a metal rod. When you spin one magnet, it creates a magnetic field that rotates around the rod. This rotating magnetic field interacts with the other magnet, which generates free energy.

Where can I download Lee Bowman Permanent Magnet Motor for free?
Some websites will try to draw you in by claiming you can download Andrew Collinst’s Lee Bowman Permanent Magnet Motor for free. Their page titles might be something like, “Lee Bowman Permanent Magnet Motor Free Download“. Then, you get to the site, and they try to justify it by saying it’s “risk-free” and then point you to the website where it’s $49.00. Well, to me risk-free and FREE aren’t the same thing!

https://www.briangwilliams.us/reviews/lee-bowman-permanent-magnet-motor.html

Then Wikipedia says:

Such a motor is theoretically as well as practically not realizable.

https://en.wikipedia.org/wiki/Magnet_motor