Jessee Es

+ Follow
since Jan 19, 2026
Merit badge: bb list bbv list
For More
Apples and Likes
Apples
Total received
In last 30 days
50
Forums and Threads

Recent posts by Jessee Es

BEL #61

Hello!

This morning, at the shop, I put the chain from the chainsaw in its place since it had popped out the day before while working on the junk poles. Once I was done with that, I went to the backyard fence and finished up the junk poles. Everything was going well until I got to that last junk pole. That last space was wide in the bottom and very slim on top due to the log used in the framing. The log was pretty straight until the top part leaned towards the right.I had put in two junk poles yet they were too thin and did not fit firmly. So I took one junk pole that looked thicker but was too thick in the bottom. So what did I do? I custom made it, lol! No, seriously, I did. I carved it out in a way from the bottom to the top in a way that it went in with that firm fit that was very gratifying. A silly voice wanted me to give up but I said,"NO!" and that's when it finally slid it in with a little banging down and perfect. I don't remember how many times I tried to put it in and it would't because I had to keep carving it here and there and wherever i was able to. So good! yes, me feeling good! In a photo, I am pointing to it. in another photo, I positioned the hatchet to show which junk pole became challenging yet very satisfying in the end when I made it happen.

In the afternoon, went up to The Lab in the back of The Abbey and worked some on the wing wall. It involved a lot of digging and taking out rotten pieces of wood. It is definitely an ongoing project.

That's it!

Have a great weekend!



5 hours ago
BEL #60

Hi!

Allright, in the morning shift, reignited the fire that was already going in the classroom. Then went into chopping wood. Afterwards, I got to work on the Arrakis sign by burning two pieces of metal for the lettering. After doing that, I took the hammocks that were drying in the classroom and put them away for storage.

In the afternoon, a panel in the backyard fencing was installed ready for junk poles and that is what I did.

That's it.
BEL #59

Hello!

This morning, with the assistance of a fellow Boot took down a hammock that was still hanging. Then went up by Volcano Road where there is a little library that needs more working on. That was also taken down. While assessing it, noticed that moisture had developed inside due to the air itself. That might be something else to look into.

After leaving the little library in the library, went to the berm shed by the shop and took three more hammocks that were already down. So in total, four hammocks were placed in the classroom to dry before putting them back in storage.

After that, kept the fire going in the classroom and began chopping more wood into smaller pieces.

Sometime later, saw that the sun had peaked through. Once I saw that, I had to go outside and soak in the sun for a little while. That was definitely cool.

In the afternoon, the half ass holiday began. The theme was Chair Repair Day in which a wooden chair was repaired. And we all as  a group got paired off and made wooden stools. When almost done, went back to Fisher Price House and made pigs in the blanket. While that was baking, saw a program where the guy described and made a wooden book shelf.

That's it.
BEL #58

Hi!

This morning, set up a fire in both the shop and classroom and kept it going all morning.

Also, chopped some wood into smaller pieces to have available when first setting up a fire.

During the process of chopping up smaller pieces used the hydraulic wood splitter as well.

In the afternoon, reignited the fires that were going in the morning and kept it going all afternoon.

Chopped more wood.

Got to learn how to revive an old Arrakis sign that needed touching up.

And did some chainsaw sharpening.

That's it.
BEL #57

Hello!

Due to the weather, basically stayed indoors.

In the morning, went to the shop and did some chainsaw maintenance.

In the afternoon, continued with more chainsaw maintenance.

During a break, got to try out the log splitter. It was pretty cool.

That's it.

BEL #56

Hi!

Since I noticed a whole lot of Xs on the Chainsaw Sharpening chart the day before, it was ideal to start the morning with what? Chainsaw sharpening, of course. Before I did that, I changed the file to a smaller size than what was previous. Even though the previous size was sharpening, there was a little scraping on some of the edges of the teeth. After changing it, none of that.

While sharpening, I took some breaks in which that time I supplied one of the willow feeders with toilet paper and refilled the bucket with saw dust.

In the afternoon, did some trail maintenance up until it started getting noticeably cold and went inside the shop to continue with more chainsaw sharpening.

That's it.

BEL #55

Hello!

So this morning, went to The Lab at The Abbey. Where we as a group, all took part in various tasks from setting up a fire to working on the wing wall behind The Abbey. I fed the Abbey cats and supplied them with fresh water. Afterwards, cleared up a section of the grounds by removing mostly a pile of wooden parts. I placed it closer to the front gate where there was already a pile of logs. Some of these parts will mostly get used for possibly firewood or/and mulch.

For the afternoon, set up a fire and did some tool sharpening at the shop. Then headed to the backyard fence and finally finished with the junk poles for now. For the last junk pole, I picked one then decided to move it to the side and opted for another one. This second one looked pretty good. I chose it because it was a little thicker at the bottom but as a junk pole, the bottom would be the top. Yet, opted out because it was rotting a little too much at the base. Then decided for a third pole but that one did not make out for the fence. The reason being, it was way too thick even though I had carved it some. In the end, I went back to my first pick and it went down smoothly yet with that grip that holds itself into place. Cool!

That's it.
BEL #54

Hi!

This morning, assisted in setting up a fire in the classroom.

Showed the newest Boot how to debark and what tools are available for the process.

Then some chainsaw maintenance.

In the afternoon, continued with chainsaw maintenance.

From there, went to junk poles. As you can see, the photos with a junk pole standing by the fence and on the ground is one I chose to use. It had previously been used as a junk pole from the old version of the fencing that had been up from years prior. It had loose bark and smaller short branches sticking out. The following photo where it is placed on the ground again, it is displaying how I cleaned it up by taking out as much of the bark as I was able to and cut out all the smaller branches and some of the tip. Then the finished product, which is the very first one on the fence (and while still daylight) shows a new and improved junk pole.  I believed I would have be done but did notice I started a little later. Even though, I continued working on them up until it got dark (after Boot time hours) now I know it will take one more day to finish this one particular section.

That's it.

















.
BEL #53

Hello!

Today it was all about junk pole building.

In the morning, junk poles.

In the afternoon, did pull out some grass from a hugel inside the paddock.

Then went right back to junk poles.

It has been a little while since I did them.

Not they have not been done since I last did them.

Others do them faster and that's ok. Again, there is a way I do them that when I finally get done, I know I put my heart into it.  

Almost done and looking forward to finishing off that section.

That's it.
BEL #52

In the morning, put away chopped firewood.

Then on to chainsaw maintenance.

Before debarking, set up a fire in the classroom.

In the afternoon, got into junk poles in the backyard fence.

That's it.