pumen li

Davin Hoyt wrote:

pumen li wrote:Thanks to the drawings you provided, I made it! The temperature in the drying chamber is 80 degrees above and 50 degrees below. The air flow is not sure how to get the data. I would like to know what is the best temperature for this dryer? Inside the collector I used a 0.5 mm thick metal sheet, and reflective film, and the glass is made of transparent sunlight sheet (endurance sheet)

Thank you! I'm looking forward to the pictures! These things come to mind: 1) Make sure to seal the system by caulking corners. 2) Wind alignment could effect the air movement. 3) Read the temperature of the air exiting the system through the rear hollow wall.

Thanks to the drawings you provided, I made it! The temperature in the drying chamber is 80 degrees above and 50 degrees below. The air flow is not sure how to get the data. I would like to know what is the best temperature for this dryer? Inside the collector I used a 0.5 mm thick metal sheet, and reflective film, and the glass is made of transparent sunlight sheet (endurance sheet)

I can't buy it. Can anyone tell me how to solve it? Or other means of payment