This morning, I was paired up with Sam, who was leading point on fixing the hand hydrant closest to the library.
This was the same issue Stephen and I had worked on nearly a year ago. The bolt on the hydrant assembly had stripped the brass pin and sheared off a piece, so when you turned the handle to open or close the hydrant, it wasn't properly connected anymore.
We drilled out another divot in the brass pin, and Stephen showed us how to use the tap and die set. There was also a bolt on either side of the assembly, and one of them had sheared off. It looked like it had been there for years. Sam took it over to the drill press and drilled straight through the broken bolt.
In the second half of the day, I was leading point, with Jesse working alongside me.
I had her clear out the trail that runs alongside my boot sit spot garden bed and around to the back of it, while I cleaned up the area outside the classroom and shop doors.
After that, I spread some cover crop seeds, including yellow clover, around the roundwood bench site I've been working on. Hopefully, it'll help get some more ground cover established around the area.
Once we finished up, Jesse and I headed over to the lab to do some cleanup. While we were there, I brought back a five-foot log for my bench project.
Little by little, I'm making progress on the boot sit spot, and it's nice to see the area slowly coming together. There's still more to do, but I'm looking forward to seeing how it all turns out.
This morning I was paired up with Jesse, who was running point. We spent the first half of the day doing some trail building and maintenance, and I have to say, it was a nice change of pace for me. I really enjoyed it.
Jesse was working on the trail along a steep slope while I collected gravel in the black metal buckets to use for the paths. Once I had collected enough, I joined her with my little hand hoe and helped out with the trail work.
Towards the last hour of the morning shift, we switched things up and headed over to the shop to light up the RMH and do some chainsaw maintenance.
After lunch, Jesse and I were paired up again, but this time I was running point. I decided to keep working on the boot sit spot.
I had Jesse and Sepper peel some logs that we'll be using for steps, following Jesse's suggestion from earlier that morning. Meanwhile, I worked on peeling a five-foot log that will become the bench seat.
Once I finished peeling it, I planed the top to make it nice and flat, then staged it over at the boot sit spot. The next step will be cutting the saddle notches so everything fits together properly.
After that, I spent some time processing woody bits for the Fisher Price House and cleaning up the classroom where we'd been debarking the logs. I also helped out my fellow boots whenever they needed an extra hand.
All in all, it was a good day. I enjoyed getting out on the trails this morning, and it was nice to make some more progress on the boot sit spot in the afternoon. Slowly but surely, it's starting to come together!
This morning Erik and I were paired up for some puddle patrol around basecamp. I was working from near the end of the junkpole fencing along the drive towards the red cabin, making my way towards the point where Erik had started. The goal was to get our trench connected and eventually have it continue towards far Arrakis. Little by little, we’re making progress.
After that, we spent some time filling up the water cistern by the library before breaking for lunch.
In the afternoon, Erik and I were still paired together, so we headed over to the Abbey to work on the wing-wall. The house jacks were set in place, the cob had been removed, and the debris was staged neatly out of the way and protected from the elements, ready for the next step. It felt good to get things prepared and leave the area ready for the work ahead.
Afterwards, we went outside the tipi gate and cut some leftover stumps down to ground level before making our way back to basecamp.
Another day of staying busy, working alongside good people, and chipping away at the many projects around the lab. One task at a time!