posted 19 minutes ago
I recently left behind a wood stove insert in an irregular structure. In 2 sentences;
- it was a 3 story structure, with a wood stove on level one (basement set about 5.5 feet into ground) and a fireplace with wood stove insert on level 2. The basement woodstove was removed long before I started heating the place, there was just a capped pipe on the wall.
- the "chimney" was a ~3'x5' concrete block chamber for the first two stories, and brick/thin interior concrete on the 3rd and roof, interior airspace dimensions ~12"x16"
I recently started using a more common system that is 1 story with about 14' of 6" metal chimney pipe to the end, and was somewhat surprised to find the old one was just about a blast furnace compared to the new one. With the wood stove doors left ajar, the old one consumes fuel about 3 times faster.
I understand the 2nd story system has a whole bunch of air underneath it that it wants to push out the chimney as soon as it's significantly colder outside than inside the structure, with the basement masonry chamber functioning like a geothermal draft generator as soon as it drops below about 52 F outside.
I also understand a ~ 10' taller chimney means more time for acceleration and momentum and thus, more draft once warm. However, I thought a larger chimney can mean slower speed, and 12x16" compared to 6" diameter....more than 6X.
The point! I'm convinced the air intake and chimney can be built to match the drag of just about any system, which is probably going to be necessary with the bypassable stove top, oven, water heater, and dryer (which might also function as a dark, 1 person dry sauna XD) running one big vortex firebox I've got tooling around in my head.
Is there any useful way of quantifying or calculating the friction/drag in a wood fired heating system as compared to its inherent geothermal draft and chimney? Or am I once again getting into FAFO territory?
Many things last lifetimes or eons, but the only thing that's permanent is the ever-changing flow itself