I got hired to build another Rocket Mass Heater here in the area.
Because of less regular refueling and 4 pieces of existing stainless steel piping we decided to go for an 8" J-tube despite the rather small space.
The main bench is only about 3 m (9') long.
I got to take my eco building buddy and it was a pleasure to work side by side.
The work started with taking down the old chimney, tough and dirty, but quick work.
We got a bunch of good bricks and even 30 usable firebricks out of the demolition. Then we presented the barrel and the chimney to get an idea of where it would all land in the room.
We then mocked up the bench, making the best use of the step between the living room (with the future RMH) and the kitchen that will be connected to the living room, divided only by the kitchen counter.
Then we sketched the outline of the bench and core and laid the first row of bricks in the clay and sand mortar. The clay is harvested on site.
Under the core some expanded clay insulation.
And up goes the core, binding the heavy fire brick with some clay slip. Also installed an ash door.
Meanwhile my colleague was building the bench from the reclaimed bricks and topping it off with marble slabs.
The area where baffle, bypass and manifold meet. A 3d puzzle that almost took me an entire day to slowly work out.
We then added mass, cob and used bricks, to the top of the bench and added on to the manifold.
Added in a self made T, a thermometer and raised a wall behind the barrel. The space between new wall and existing wall, containing the chimney, was filled entirely with expanded clay.
We then had the first burn. Some smoke and never reached more than 70C in the exhaust, but we got a nice roar. We'll be back tomorrow for another burn and some plastering.