Cristobal Cristo wrote:Oscar,
A traditional Podgornikov type kitchen stove firebox has a cast iron ash grate and the top of the firebox will be located at least 40 cm/16" below the plate to allow cleaner combustion. Traditional/older/not improved kitchen stove designs still use low firebox design impairing clean combustion (easy to spot them by noticing firebox doors located just under the top plate). I have experimented with it and also with L-tubes. L-tubes generate dense torch-like flame that is good for quick bringing to boiling temperatures as long as fire is going on. Hot radiating coals will be obscured by horizontal ceiling of the firebox hampering slow cooking and not fully utilizing the fuel potential. L-tube burns cleaner. I like to have both so I came with an idea of having variable geometry firebox. The one that I'm building in my house will have a grate, because a lot of continuous cooking produces too much ash that has to go somewhere to not impair combustion of the new fuel.
The ceiling level of the firebox has built-in brick ledges on which I can put:
-large firebrick (or two smaller pieces) to create a ceiling, leaving around 60x230 mm port
-piece of thick, dry, wood plank that will act a consumable ceiling and form a port when I need intense flame, but will burn and will create coals when I want coal phase cooking; I have not tried it yet
-stainless steel damper that I will be able to operate with a poke from the firebox opening (when I want to open it I will lift the hinged plate to rest vertically against the front side of the firebox); if 304 stainless will not stand it I will make it from 330
The dimension of the firebox I'm building is 230x230x195mm, so firebrickxfirebrick, 3 bricks high. The temporary outside one is built from regular red bricks, so firebox is 8x8x8". The house version firebox has additional lower level 100 mm deep (over the grate). I have calculated that it should have equivalent fuel capacity to fi120 mm batch box and since it burns quickly it should deliver the same power, for which I assumed 3.4 m2 ISA, but just in case, I designed a chimney shortcut to preheat top o the stove before letting the exhaust to the bottom chimney intake..
I will document it in a separate thread.
I'd like to make your stove.
Cristobal Cristo wrote:
You may have a 75% firebox ceiling to make it more L-tube like for better flane density, or remove it when coal radiation is desired for slow cooking.
Cindy Cain wrote:I wish I had your troubles with biomass to dispose of. Our voles don't leave enough of the chokes for we himans to get a decent harvest. Any ideas? We live in a busy road so barn cats aren't an option
Matthew Nistico wrote:
In his YouTube poster notes, he links to a set of plans for building the washer. Currently, the photos at that link illustrating his construction process seem to be broken, rendering the plans fairly useless. I have the full plans in a text document, but don't see how to attach one to this post. Instead, I have posted it to the cloud. I think anyone should be able to view and download that document.
Plans: DIY off-grid clothes washer
Cody Hahn wrote:Bumping an old thread here. So, I have the Handmade House Guild package, and I can comment and weigh in on it and what it offers/teaches, as it currently stands (it's a slowly and so far ever-evolving and growing series of courses). I'll try to come back and comment on this when I have a chance, in a way that might benefit/steer those taking a look at any of the currently offered individual courses, or on the Guild package as a whole.