top of riser to top of barrel

Robert Cloud Jr

Posts: 9

posted 9 years ago

Number of slices to send:

Optional 'thank-you' note:

Send

What is the recommended distance from the riser top to the barrel to with an 8 inch diameter riser?

thomas rubino

master rocket scientist

Posts: 7038

Location: latitude 47 N.W. montana zone 6A

4113

I like...

posted 9 years ago

Number of slices to send:

Optional 'thank-you' note:

Send

If its a J tube than 2" is the recommended minimum.

For all your Montana Masonry Heater parts (also known as) Rocket Mass heater parts.
Visit me at
dragontechrmh.com Once you go brick you will never go back!

Peter van den Berg

gardener

Posts: 1202

Location: +52° 1' 47.40", +4° 22' 57.80"

662

I like...

posted 9 years ago

Number of slices to send:

Optional 'thank-you' note:

Send

If you devide the cross section area of the riser by its circumference you'll get the size of the minimum top gap. This is correct for round and square risers alike.
Be careful though, the top of the barrel buckling in would mean you'll get much less than the minimum, so it would be wise to add some tolerance. Please be aware of the fact there isn't such a thing as a maximum top gap.

In case you are talking about a batch box instead of a j-tube, the recommended top gap is one foot.

regards, Peter

Just let me do the talking. Ahem ... so ... you see ... we have this tiny ad...

Your suggestions have been mashed into the PIE page - wuddyathink?

https://permies.com/t/369924/suggestions-mashed-PIE-page-wuddyathink