Custom Bike Fender - metwalworking.wood.fender PEP BB

I made a fender for my fatbike. I'm riding through the winter this year, hence the need for the big tires.

I started with some metal from the scrap yard like usual. All rusty and bent up. First job was to straighten it out as much as I could, then cut a piece and take the rust off it. See photo one. Then I thought about how to attach the thing. This took me a good while. First I thought of some thin rods to support the fender, then realized there's no way to really securely attach them to the frame. I eventually came up with the idea that I put together in photo 2: a ring clamp around the seat post (pencil taking the place of a bolt), then an L-shaped piece that would hold the fender. I was off to the races! Or maybe not. At first I thought I was going to make the L shaped piece and the ring clamp out of the original sheet metal. Upon thinking a little harder I realized there was no way the thin metal would support the weight of the fender. "This isn't as easy as I thought it'd be," I thought to myself. I scrounged through my scrap bin and found some old pieces that I practiced  welding on. Aha! It would be more than strong enough to hold the fender. Again at first I thought the ring clamp and the L piece would be separate, but decided against that. I welded them together instead to make the piece much stronger.

Following this all I did was take the corners off the fender and round things out a bit so I don't slice myself getting on and off the bike. I also cut the length much shorter to lighten things up...this is a mistake if you want to protect your butt from getting wet.  I painted the underside of the fender so it doesn't rush out too quick, and I'm not sure what I'll do to the top yet. Maybe clear nail polish to keep the sheet metal look.  Finally, I drilled holes in all the pieces, and they bolt together like you see in the last 4 photos.

Mistakes made/lessons learned:
- When making a seat clamp make the it fits the post very tightly! If not whatever you attach will shimmy around
- If you want the fender to keep your entire backside dry (not just your upper back) you need to extend it over the entire top of the wheel, or almost
- If extending over the entire wheel, another support system would work much better as the weight of the fender would be more evenly distributed

Overall I don't mind if this isn't given all the pep points. It isn't super pretty, and it is only partially functional. I still learned a lot though, which I often do when I do these sorts of things. Hope the next person who does this PEP learns from my mistakes!