iAVS Sandponics - the earliest and complete form of Aquaponics - how come no one is talking about?

I just searched on this forum for "iAVS" and found it was only mentioned by Gary Donaldson and another person once respectively. No one posted any pictures about it. I thought this permies group would be the best place to at least talk about and try it.

Anyway, I have done some home work and primary tests. But I am in the process of purchasing a home and planning to try it in the backyard, so I am switching to it but not in the full scale. So I do not have a lot of pictures to show it either. I just finished posting an article about it on my blog so I just post its link here, hoping to find someone who are interested in it as well.

http://dripgrowtower.com/blog/2020/02/03/shocking-discovery-of-iavs-sand-aquaponics

Well, I do see that I need to post Mark McMurtry picture and the basic layout of iSAVS for now...





And this video...

Just to add one ore point... since I am going to place the whole iAVS setup in a greenhouse (with both solar thermal and geo thermal air to maintain the temperature), sand acts as a better thermal mass than expanded clay.

I have also been reading about it and hope to set up a system, but have not yet done so. I have read that the sand is supposed to be "inert" (won't react with vinegar), so my locally-produced sand probably won't work because I live in an area of pure limestone and they make sand by crushing rocks. I also read the sand was not supposed to be too fine--a mortar sand would be good. Lastly, I read that the top and the trenches should be level, but the bottom of the sand container should be sloped, so that water distributes evenly across the top, but still drains. For longer systems you should use perforated drain pipe to help flow. Typically the pump runs for 15 minutes every 2 hours to flood the sand, which not only waters and fertilizes the plants but aerates the water.

From what I have read this was the original design and is superior to aquaponics systems using clay balls or gravel. Supposedly someone took the design, commercialized it, but in the process used gravel because they did not have sand and did not think it mattered. Apparently it does matter, and sand is supposedly superior to other options (cheaper too). I recently joined a Facebook group for iAVs that Gary Donaldson manages: https://www.facebook.com/groups/1318946951452383/. Within the group you can access quite a few files from the left menu.

I too would love to hear of any experiences with these integrated AquaVegeculture systems (iAVs; also called sandponics).

Kevin, focus on the big picture. As long as the fish waste is not ended up at the bottom of the grow bed, you win.

As for the sand, I am testing the Play Sand I purchased from Rona (I live in Canada).



Yes, maybe this type of sand is too fine but I still have hydroton and simply place hydroton at the bottom and then add my sand. Just in the testing stage so that I do not need to follow every detail of iAVS, otherwise you will never be able to start.

BTW, I have not placed any fish yet so that I can add whatever I want to test. For example, I added a whole 4L milk bottle of fermented urine to the sand to see how clear the water be coming out of the grow bed. Well, the result? Clear water.

When I started my aquaponics, (with sand) I hadn't heard of iAVS. I was just trying to prove to myself that the concept would work for me without spending much money. I had leftover sand from a project, so I tried it. It was a slow start, but it works. It improves each year, presumably because organic matter acumulates. Or because the bacteria (and fungus?) population increases and becomes more balanced? My setup differs from proper iAVS mostly because I don't have the trenches and ridges. I basically dug one trench around the outside, once I realized the water wouldn't go through the sand as fast as it pumped. I had to redirect it or it would submerge everything. Here's an out of date picture:



I've not posted much about it here, because I didn't know if there was much interest, nor whether I had anything to contribute. I will post here in the future, now that I know. Here's a link to where I did post about it for a while. By the way, the linked thread mentions the use of fertilizer. I only did that during that summer. The next summer, I tried not using it, and things kept improving anyway.

Hummmm, very interesting.  Thanks for the links.  

T Melville,  your link led  me to join yet another gardening forum!


So far,  it seems like you have to build up the soil,  as if it were, well sandy well drained soil that had a hard time holding onto nutrients.
You even mention adding sticks,  etc to your grow bed.
I'm assuming you don't use a bed of woodchip because it wouldn't  filter the water,  but actually pollute it?
Sandponics  seems like growing in a sand filter, where the the growing gets good once the filter gets dirty.
I would be tempted to use a woodchip filled prefilter  in line with the sandbed, to speed up the process of "dirtying" the sand.

I suspect I am missing something about the sandponics concept, because I don't see as more than a planted sand filter.

I used sand because everyone seems to use inert, (initially) sterile, extremely well drained media. I've seen youtubers remove roots and dead material and keep organic matter down. I never got it. Seems to me organic matter is great, provided drainage remains very good. The draining of the water, and replacement with air (Without allowing media to become dry.) makes my sand into a biological filter. It harbors a lot of the bacteria that converts fish waste into nitrogen. (The nitrogen cycle.) It may be that the plants also like the constant moisture with incorporated air, I really don't know.

I would really like to grow/rear fish. Unfortunately it will most likely be in IBC 300gallon containers.
I know that for others installing a half acre pond is an easy mater and its a much more natural system, sadly I am not able to do that.

Could I use the fish tank as a compost tea brewer? A bag with worm compost + a dash of seasalt/sea90 + EM + fish food + airstone.
Could I do a foliar spray with this weird fish tank compost tea?
Could I do dripline fertigation with this?

Buying fish food is similar to buying chicken feed, so it doesn't bug me too much. And I am sure I could grow some feed onsite like worms, duckweed, etc.
After the initial fill they dont use that much more water than, chicken either.
Between the airstone and sump pump. I wonder how much electricity is being used.

With iAV, the pump is on for 20min and then off for about 100min. So 1/6th of the time.
Do I need to do a full 300gallon turnover in that 20minutes. aka a pump rated for 900gallon an hour @ 73W/hr or 146W/day with 1ft head.
I would need a 1CFM at 1.5PSI air pump using 25W/hr or 600W/day. For a total of 746W/day.

Would you all use different air pump or water pumps? How does my numbers compare to whats out there, hopefully mines are too high?

S Bengi, 20 minutes of pumping maybe too much.

In my test system, I happen to have a spare pump there and it is really powerful, I can only run the pump for 1 minute to fill to the upper water level in a barrel (supposed to be fish tank but no fish in it while I am doing the testing). I use an airlift pump running all the time to pump water slowly from there to the grow bed and also to aerate the water. And I use a siphon and an H-shaped device made based on the following video so that the fish tank water level will not go below a certain limit:



iAVS was well tested and researched by the original inventor Mark McMurtry. I will follow his advice properly once I get our property (my wife and I have made the offer and got the mortgage approved). I will do it even before I build the greenhouse to cover it - the spring is coming :-)

I really love this H-shape siphon device, that has the safety feature of not allowing the tank to ever get empty by accident.

I have a few questions.
Most iAVS systems seems to ask for a 15min to 20minutes runtime for the pump, with your system configure for only 1minutes, how does this changes things?
Whats the stats on your powerful test pump, "mine's" is 900gallon/hr at 73W/hr, with daily totals of 2hrs (6X20min) and 1800gal (6x300gal) and 146WHr (6x24.3WHr)
How many times per day are you running the pump? most iAVS system call for 8 times for 15mins or 6 times for 20minutes, a total of 2hrs in 12hrs and a 12hrs night rest.
Based on what I have seen, the 'air pump' oxygenated water is returned directly to the 'fish tank" for the fish, yours seem to be going to the growbed, what have you observed so far?
How much energy is your air pump using with the 24hrs runtime? For me it is 25W/hr or 600W/24Hrs. I am very concerned about total energy used per day.

Based on what I have read, the sand grow beds get a "no watering" night rest. You are slowly watering 24/7.
Did you read the same thing about no watering at night. I find that to be very shocking but it is suppose to work.

There is also a 90-100min full drain during the day between 15min to 20 watering.
https://garydonaldson.net/2015/04/sand-bio-filter-construction-and-operation-part-1/

After re-reading the link below I was able to answer my own question. Only 1/4 of the fish tank is drained per 15-20min runtime. So I can downgrade the pump from 900gallon/hr to 225gal/hr.
https://garydonaldson.net/2015/04/sand-bio-filter-construction-and-operation-part-2/

I am using the 120W pump purchased from Amazon - see link https://www.amazon.ca/gp/product/B07PRT3VLJ

As for the 24/7 running air pump, its power is only 12W. With the h-siphon and H-flow thing, the water level remains constant even though the airlift pump can still pump some water out - it simply goes back to itself once the water level comes to the limit. That is why I say it simply as an aerator rather than an airlift pump after this, until the next cycle of water pumping by the water pump.

OK, I finally have time to shoot a video about my first and second real tests of iAVS, the simplest form of aquaponics:


I pump water for 8 minutes for every two hours. No water pumping during the night time.

iAVS sandponics in Africa with great results: adding fish and planting vegetables (English and Chinese subtitles):

We tried with our Aquaponics Systems pipes, grow beds, Dutch buckets and sand(ponics)

Sand was the first we removed. Way to labor intensive and prone to clogging by meaning that the density of the ground permanently changes.
(Algae and fish solids)

Some people praise it but I have never seen anyone having it longer than a year before the sand got anaerobic.

Sure as small scale something to play with, but if you really want to have a little extra in your kitchen "do it in Rome like the Romans do"

Gravel or Clay pebbles are easier to clean, faster and more often to reuse and the ebb flood effect with the bell syphon gives the right amount or air to the roots.
The easiest way for shallow plants is sticking to deep-water grow beds..