• Post Reply Bookmark Topic Watch Topic
  • New Topic
permaculture forums growies critters building homesteading energy monies kitchen purity ungarbage community wilderness fiber arts art permaculture artisans regional education skip experiences global resources cider press projects digital market permies.com pie forums private forums all forums
this forum made possible by our volunteer staff, including ...
master stewards:
  • Carla Burke
  • Anne Miller
  • Nancy Reading
  • John F Dean
  • r ransom
  • paul wheaton
  • Timothy Norton
stewards:
  • Jay Angler
  • Pearl Sutton
  • Andrés Bernal
master gardeners:
  • Christopher Weeks
gardeners:
  • M Ljin
  • Thekla McDaniels
  • May Lotito

cutting ditches to move water around a ranch ("stock pond" refills) on a mega-site

 
Posts: 90
Location: usa
8
  • Likes 9
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
When cutting an irrigation stream on contour, what have you found works the best for cutting the stream (passive water flow to the 1st stock pond then across a field to where it's needed, think your favorite gold mining operation water pond)? I have the funds and about 1acre foot to irrigate land from a stream with. What would you recommend using to cut the irrigation trenches?

When I get operating at full capacity there will need to be at least 2 Olympic swimming pools flowing through the channels per day (It's a megasite).

I've already ruled out a trencher, and  bulldozer.

Rather than valves I plan to use a sluce gate system.
 
master steward
Posts: 20006
Location: USDA Zone 8a
5010
dog hunting food preservation cooking bee greening the desert
  • Likes 8
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
I use a pointed hoe for digging ditches.

Digging during a rainstorm really helps.
 
pollinator
Posts: 6374
Location: Bendigo , Australia
614
plumbing earthworks bee building homestead greening the desert
  • Likes 11
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Have you done the calculations about the cross sectional area of the channel needed to carry that volume?
Then made an allowance for the gradient of that channel to get the volume of water through in the time scale you speak of?
 
pollinator
Posts: 1862
Location: Victoria BC
361
  • Likes 9
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
That comes out to around 1000 gallons per minute if these ditches are running 24/7.

If I was putting in a bunch of ditches for that sort of flow, I would buy or have made a v-bucket for an excavator. A bit of googling suggests around an 18" flat bottom, and then slope the sides at 45*. Make it as big as your excacator can easily handle, no need to go full depth but the flexibility is good. Google thinks 1.2 feet deep is a minimum ditches depth for a shallow slope ditch to handle this flow..

I've done a ditch that handles maybe 2-3x this much water in storms with a 50" cleanup bucket on a 150 size excavator, from the side, eyeballing for slope; it works fine, but the ditch shape is not as good as a v-bucket would give you, and it takes more care to achieve an acceptable shape. You can also just dig an overly wide square-sided ditch and let the sides slump; again the v-bucket will do a better job.

In my soil the 150 was a great size for this, a 120 would have been plenty good, and my 3.3 ton mini can do the same job, slowly. If our heavy clay hardpan was close enough to the surface to hit while ditching, the 150 would be frustratingly slow and the mini absolutely futile. If I had to ditch in the hardpan I would consider a 200 to be absolute minimum.. so, consider your ground before investing in that bucket.
 
gardener
Posts: 3655
Location: Cascades of Oregon
1106
  • Likes 7
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Wow, two Olympic pools is quite a bit more than one acre foot of water. 326k gallons v 1320k gallons, per day is an incredible amount of water. Two Olympic pools is roughly 4 acre ft. of water. My irrigation district allows Me that 326k gallons per year not daily. 365 days x 4 acre feet per day of water should be able to grow just about anything. We use a pointed hoe, but nowhere near your anticipated flow. Mini excavator for annual trench maintenance.
 
Kevin Stanton
Posts: 90
Location: usa
8
  • Likes 6
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

John C Daley wrote:Have you done the calculations about the cross sectional area of the channel needed to carry that volume?
Then made an allowance for the gradient of that channel to get the volume of water through in the time scale you speak of?



A river with all the water rights, lets just say 1/2 billion gallons available on a normal year.

How do you keep the land fairly flat so you can pull trailers across for things you need to keep livestock happy.
 
Kevin Stanton
Posts: 90
Location: usa
8
  • Likes 6
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

D Nikolls wrote:

If I was putting in a bunch of ditches for that sort of flow, I would buy or have made a v-bucket for an excavator. A bit of googling suggests around an 18" flat bottom, and then slope the sides at 45*. Make it as big as your excacator can easily handle, no need to go full depth but the flexibility is good. Google thinks 1.2 feet deep is a minimum ditches depth for a shallow slope ditch to handle this flow..

I've done a ditch that handles maybe 2-3x this much water in storms with a 50" cleanup bucket on a 150 size excavator, from the side, eyeballing for slope; it works fine, but the ditch shape is not as good as a v-bucket would give you, and it takes more care to achieve an acceptable shape. You can also just dig an overly wide square-sided ditch and let the sides slump; again the v-bucket will do a better job.



V buckets are slow,, because you need to lift each load out, I need something perpetual.

45* won't work, because when driving across the trench you're going to feel it, just like riding a bull.

I'm expecting to have the ditches fill in a few times with blow sand but as more grass covers the soil, and will probably do the final run through with something like a duck boat.
 
Posts: 16
Location: 28040
2
  • Likes 8
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Will the topography allow you to use a subsoiler? I’ve used a subsoiler for diverting water, laying water pipe. directing water in/out/to fields, ponds and lakes. Easy and simple to use if you have an adequate tractor or can borrow one(most require a 3 point hitch). They’ll usually dig a narrow trench about 18-24” deep. I’ve cut across hillsides at 45 degrees to redirect water to control erosion. I’ve welded a piece of 2” black pipe down the back of the blade on mine to lay black pipe. I put a piece of threaded rod across the top of legs/stand(square tubing) that holds it upright when not in use. That allows me to put a roll of black plastic pipe up to roll off and feed down the 2” pipe to lay water lines.
 
Rocket Scientist
Posts: 4850
Location: Upstate NY, zone 5
812
5
  • Likes 7
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
If you need a gentle enough swale to drive over easily, I think you need to use a backhoe or excavator from the side to scoop one bit at a time. Are you going to be running this frequently or continuously all year, or even all growing season? If so, I would be concerned about driving over it and leaving ruts. Is the soil so solid that once cut, it will not rut? Or the "sand" so firm that water does not make it softer?
 
Robert Ray
gardener
Posts: 3655
Location: Cascades of Oregon
1106
  • Likes 8
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Kevin I am a bit confused. You initially indicated you had 1 acre foot of water available. Now you are saying you might have access to 1534 acre feet of water (1/2 billion gallons)? It would be helpful even if this is just a mind exercise to know a bit more of the site and true number of acre feet of rights to water. Is it in the US? AZ, NM, TX? all have a few diferences as far as water rights. Is it a true 0 degree of elevation change? You have also said strip mined like and strip mined. Is it a reclaimed strip mine site? If in the US  it is required that the area be PMLU (pre-mining land use) and stockpiled topsoil replaced, and vegetation replaced. The AOC condition requires original contour or higher, again if in the US. Even with an existing NDA  you indicate exists, these are things that would help with intelligent answers and not disclose a specific location. I grew up in Wyoming so am a bit familiar with coal and uranium strip mining.  Being from the west familiar with the oddities of water rights that are more prevalent in obscurities than the eastern US. Quit teasing us. Acreage, elevation change, in US or Mexico, true indication of water rights availability, some idea of available financial input and if you are looking for a permaculture solution or just flood irrigating. If you are not flood irrigating what type of irrigation are you going to use? What plant are you going to use or what are you considering? That would help intelligent answers to how much water would be needed. To drill down to a proposed plan of action you need to give us a bit more meat. Help us out here.
 
John C Daley
pollinator
Posts: 6374
Location: Bendigo , Australia
614
plumbing earthworks bee building homestead greening the desert
  • Likes 4
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
In India they use massive swales to move water in the manner you now describe.
Please be clearer in your requirements.
 
Robert Ray
gardener
Posts: 3655
Location: Cascades of Oregon
1106
  • Likes 5
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
The swales in India are impressive. https://www.youtube.com/watch?v=jDMnbeW3F8A
 
Kevin Stanton
Posts: 90
Location: usa
8
  • Likes 2
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

jack longtree wrote:Will the topography allow you to use a subsoiler?



I have a range to worry about from construction flat to mountainside.

Glenn Herbert wrote:If you need a gentle enough swale to drive over easily



chicken tractor/ATV flat once the roads disappear due to good enough pastures.

Robert Ray wrote:Kevin I am a bit confused. You initially indicated you had 1 acre foot of water available. Now you are saying you might have access to 1534 acre feet of water (1/2 billion gallons)?

Is it in the US? AZ, NM, TX?

Is it a reclaimed strip mine site?

If you are not flood irrigating what type of irrigation are you going to use?

What plant are you going to use or what are you considering?



The sizes are the same thing, since it's a megasite for a homestead (more than 10k AU at any given time).

This is the area, and the extension person (half hour conversation today) said that's the correct amount of water legally authorized to use.

Yes, a reclaimed site that I can "design" as I wish due to the amount of material removed in the area. The river was rerouted for the strip mine, so I "own" the river.

I'm going to use shallow "channel irrigation", and have it flow out through a single channel to keep fresh water for the livestock, and keep fish happy.








I'm specifically thinking about something like this (but wider [i.e. 20 feet] and deeper [i.e. 3 feet]) for the swales since it does an amazing job: https://www.youtube.com/watch?v=aiXW9X27Kh8
 
Robert Ray
gardener
Posts: 3655
Location: Cascades of Oregon
1106
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Just trying to wrap my head around the size of your project. 10k animal units in an area that requires 100 to 250 acres per cow/calf unit so we are talking 1,000,000 acres on the low side?
AZ and TX depending on whether navigable or non navigable allows ownership of a river bed but not the water therein. In NM all water courses are owned by the public, but again water rights are subject to prior appropriation.
I was involved in creating a soft landing on the Little Deschutes River a few years ago. Not just the State but the Army Corps of Engineers had to be appeased. In the US depending on the state one might own the riverbed but definitely not the river.
Good luck on your project, I look forward to your results.
 
John C Daley
pollinator
Posts: 6374
Location: Bendigo , Australia
614
plumbing earthworks bee building homestead greening the desert
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Wow, now we can see a better picture of what you are looking at.

That video seems to stop land from water logging, rather that shifting large volumes of water.
Where will the channels drain too, a dam, a river bed?
 
Kevin Stanton
Posts: 90
Location: usa
8
  • Likes 5
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

Robert Ray wrote:Just trying to wrap my head around the size of your project. 10k animal units in an area that requires 100 to 250 acres per cow/calf unit so we are talking 1,000,000 acres on the low side?

AZ and TX depending on whether navigable or non navigable allows ownership of a river bed but not the water therein. In NM all water courses are owned by the public, but again water rights are subject to prior appropriation.



I'm calculating AU at 1 acre per animal, due to ability to grow grass with the water available and still have some left for discharge from the ranch.

My water rights are defendable in court according to the deed, so my water is mine before a bad year without rain.
 
D Nikolls
pollinator
Posts: 1862
Location: Victoria BC
361
  • Likes 7
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
If you want shallow swales rather than normal ditches, what's the problem with a dozer with tilt/angle gle blade?

Depending on the soil/terrain a grade might also do fine..

But realistically if you expect to have much impact on 10k acres you will probably own or hire all the above machines for the appropriate areas..

Given the area in question, using normal ditches with occasional fords/culverts seems pretty reasonable too.
 
Robert Ray
gardener
Posts: 3655
Location: Cascades of Oregon
1106
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
What is the budget for this project?
So we are talking 10,000 acres
It is in the US
It comes with 1534-acre feet of water rights
If the property is10k acre @ 300.00 the purchase price will be 3 million dollars? Interest rate if financed?
Does any equipment come with the purchase?
Housing?
Cattle?
Ranch hands to manage 10k cattle? Is capitol available to cover salaries?
This is huge project
 
Kevin Stanton
Posts: 90
Location: usa
8
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

John C Daley wrote:
That video seems to stop land from water logging, rather that shifting large volumes of water.
Where will the channels drain too, a dam, a river bed?


With approval to discharge after absorbing "hard hits of rain" the river it came from, and/or flow in/flow out similar to what Stamets did with the Ecoli issue on his facility.


D Nikolls wrote:If you want shallow swales rather than normal ditches, what's the problem with a dozer with tilt/angle gle blade?

Depending on the soil/terrain a grade might also do fine..

But realistically if you expect to have much impact on 10k acres you will probably own or hire all the above machines for the appropriate areas..

Given the area in question, using normal ditches with occasional fords/culverts seems pretty reasonable too.



The goal is with overflow flowing back into the field (if the state says they have too much water, tell them to send it my way [the el nino surplus]), so I don't really want berms.

The terrain: rejection of data centers on federal lands after site was being developed.

I was thinking sluice board system (saves money)

Highway ditches near me are giant ravines you're going to feel when driving through.

A fjord in a desert/savanah?

Robert Ray wrote:What is the budget for this project?


pending: BLM/Army Core of engineers/Billionaire workers/budget/approval
 
John C Daley
pollinator
Posts: 6374
Location: Bendigo , Australia
614
plumbing earthworks bee building homestead greening the desert
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
I am confuesed!
What does this mean please?
-  " I'm calculating AU "
- "flow in/flow out similar to what Stamets did with the Ecoli issue on his facility."
- The terrain: rejection of data centers on federal lands after site was being developed.
- Is this a real job?

 
Kevin Stanton
Posts: 90
Location: usa
8
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

John C Daley wrote:I am confuesed!
What does this mean please?
-  " I'm calculating AU "
- "flow in/flow out similar to what Stamets did with the Ecoli issue on his facility."
- The terrain: rejection of data centers on federal lands after site was being developed.
- Is this a real job?



I'm also calculating AU after the grass is fully producing.

Paul Stamets - solved the E-coli issue in Washington to bring salmon back

Do you follow federal policy much?

Yes.
 
Robert Ray
gardener
Posts: 3655
Location: Cascades of Oregon
1106
  • Likes 7
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
John, AU is animal unit, dairy cows it is calculated as 1.4 with beef it is calculated as 1.5 (cow and calf) Currently in the Chihuahuan desert with normal available forage the general figure is one cow and calf needs 100-250 acres. The proposals goal to develop a one acre per cow, once the forage is at peak is an admirable goal.
Stamets used mushrooms and wood chips to address an e-coli issue quite effectively, not sure why it is brought up in this context. Up to this point there has been no reference to e-coli being an issue. Your being from Australia how would you have any clue to Stamets efforts in mycology in the US.
I am guessing that data centers were planned on the strip mine like ground/ reclamation area, again no prior reference nor issue if it was undeveloped.
In Oregon holding water in a pond they calculate evaporation and evapotranspiration in water use allotments, since we don't know the state the proposed project is in I am unaware of that particular jurisdictions thoughts. But two Olympic sized pools in the desert would be a huge number as far as evaporation. A flow through system would prevent that evaporation penalty if one exists in the projects proposed state.
It is generally accepted that one experienced ranch hand can handle 250-500 cows, so on the high side a need for 20 employees.
There are so many members with real time experiences some specifics would really help them give advice that could be helpful.
 
D Nikolls
pollinator
Posts: 1862
Location: Victoria BC
361
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

Kevin Stanton wrote:

John C Daley wrote:
That video seems to stop land from water logging, rather that shifting large volumes of water.
Where will the channels drain too, a dam, a river bed?


With approval to discharge after absorbing "hard hits of rain" the river it came from, and/or flow in/flow out similar to what Stamets did with the Ecoli issue on his facility.


D Nikolls wrote:If you want shallow swales rather than normal ditches, what's the problem with a dozer with tilt/angle gle blade?

Depending on the soil/terrain a grade might also do fine..

But realistically if you expect to have much impact on 10k acres you will probably own or hire all the above machines for the appropriate areas..

Given the area in question, using normal ditches with occasional fords/culverts seems pretty reasonable too.



The goal is with overflow flowing back into the field (if the state says they have too much water, tell them to send it my way [the el nino surplus]), so I don't really want berms.

The terrain: rejection of data centers on federal lands after site was being developed.

I was thinking sluice board system (saves money)

Highway ditches near me are giant ravines you're going to feel when driving through.

A fjord in a desert/savanah?

Robert Ray wrote:What is the budget for this project?


pending: BLM/Army Core of engineers/Billionaire workers/budget/approval



Not a fjord. A ford. Ie a bit of ditch with much broader shallower slopes so you can readily drive through, while keeping the bulk of the ditch more ditch shaped for ease of sluice board control and minimization of the area consumed by said ditch.

Ditch or swale, if you want no berms after ditching/swaling you need to spread the material dug out of said ditches or swales.. it has to go somewhere! A dozer could do a double sloped ditch in 2 passes, and then a dozer, grader, or a big tractor with a spiffy grading attachment comes along and spreads the spoil generated by the dozer nice and flat..

There's no free lunch method that I know of. Maybe you could get a v-shaped ditching attachment built that avoids the problem of diving, and add adjustable spreading blades to spread/flatten the spoil, and do it all in one pass, dragging it with a D9 or some such.. sounds to me like a copper plated bitch to control, and bloody expensive. Meanwhile you could hire some competent dozer operators and throw em in smaller dozers with a grader to do the spoil spreading, and they ought to be away to the races..
 
John C Daley
pollinator
Posts: 6374
Location: Bendigo , Australia
614
plumbing earthworks bee building homestead greening the desert
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Thank you Ray and D, acronyms cause so many issues, with understanding.
 
Robert Ray
gardener
Posts: 3655
Location: Cascades of Oregon
1106
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
What would be your estimate on start to finish, earthwork, cross fencing, planting your selected cover crop to the final 10k animals on the fields?
The size 10k acres, to put it into perspective is just under 1/2 the size of Bend Oregon. 15 square miles. Just over 1/4 of the size of Minneapolis. I'm already tired.
 
Robert Ray
gardener
Posts: 3655
Location: Cascades of Oregon
1106
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Another idea? https://www.youtube.com/watch?v=D_lw7Z0bR0k
 
Robert Ray
gardener
Posts: 3655
Location: Cascades of Oregon
1106
  • Likes 10
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Kevin, for me there are some important info that seems to keep changing. I understand this project is still on paper. My confusion still exists:

Have you been on site yet?

Strip  mine like, the initial description, or a truly reclaimed strip mine that would have to have been covered with the original topsoil and plants upon cessation of mining. In the US the site is required to be  restored to a contour has to be above or equal to previous contour, so I am wondering about "amount of material removed" means.

A proposed data center on Federal land? If on Federal land that use wouldn't have any bearing on the private property project. If it does how?  What is its significance and area of disturbance on the project property.

What does Stamets e-coli experience have anything to do with your proposed project other than the flow through component?

There are people here from all over the globe, they wouldn't know anything about US policies unless one makes them aware.

10k of flat ground as initially described or 10k of mountainous and flat ground? This would be important for educated answers and solutions. Is it flat that requires no topographical info as you previously indicated?

40 mil budget. Is there any machinery, housing, cattle over and above that 40 mil? Is the 40 mil the absolute budget?

15 sq miles how fast do you see the project coming together? Earthwork, cross fencing, seeding, stock on the ground. Is it going to be done in increments or all in at the beginning.

If there is a mountainous component in the 10k what is that size. Its use would be far different as far as flat ground pasture. That difference would also influence AU productivity. What is the true topography? If there is an elevation component now, we can add many other water saving/gathering components. If so, area of and elevation information. Knowing where the mountainous area is on the projects site might influence rain and rain shadow influence computations.

Since we are talking creating a forage source I am puzzled by the fear of plant oxidation creating a fire hazard. To bring the proposed 1AU per acre there is going to be seasonal plant material on the site. My research into the Australians and Argentina impression trial sites made no reference to increased fire danger being a concern. It appears in fact that there is increased water retention, that would decrease fire hazard. I found no fire dangers concerns in the PDF papers from the US as of yet.

What state? Knowing this would help in making comments on what the water Gods of that state allows.

State of Emergency Flood Plains usually are in areas in which infrastructure, populations and escape routes are in jeopardy "during" a flood. Right now the S.W. is getting hammered. Is your project site close to a population center? Major highway? Utility infrastructure? What components will support an Emergency Flood Plan request that could release monies to implement and enhance your project?


This is a huge admirable project. Getting a true sense of budget, location, topography will allow folks to drill down to suggestions that are pertinent to your goals and location.


 
Kevin Stanton
Posts: 90
Location: usa
8
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

Robert Ray wrote:
Have you been on site yet?


Seen plenty of pictures, and they're already asking for hydrating the land advice, moving this week. I told them build a water diaper for overflow, and mega-berms to hold the water back from the dams to help out the state/community.

Robert Ray wrote:
Strip  mine like, the initial description, or a truly reclaimed strip mine that would have to have been covered with the original topsoil and plants upon cessation of mining. In the US the site is required to be  restored to a contour has to be above or equal to previous contour, so I am wondering about "amount of material removed" means.


Yes, a high mountain strip mine.

Robert Ray wrote:
A proposed data center on Federal land? If on Federal land that use wouldn't have any bearing on the private property project. If it does how?  What is its significance and area of disturbance on the project property.


The significance is essentially 1 of the 2 places of hydration for aquafer. How do you disturb the soil more than a canceled mega-building (data center), and strip mine?

Robert Ray wrote:
What does Stamets e-coli experience have anything to do with your proposed project other than the flow through component?


There was a major drop of livestock carried diseases from a mushroom farm being downstream of a cattle ranch, and with a fungal dominated soil, it will treat the diseases of concern.

Robert Ray wrote:
There are people here from all over the globe, they wouldn't know anything about US policies unless one makes them aware.


Ray Archuletta, Gabe Brown, Joel Salatin, et al are.

Robert Ray wrote:
10k of flat ground as initially described or 10k of mountainous and flat ground? This would be important for educated answers and solutions. Is it flat that requires no topographical info as you previously indicated?


It's larger than 10k acres.

Robert Ray wrote:
40 mil budget. Is there any machinery, housing, cattle over and above that 40 mil? Is the 40 mil the absolute budget?


Yes, the works.

Robert Ray wrote:
15 sq miles how fast do you see the project coming together? Earthwork, cross fencing, seeding, stock on the ground. Is it going to be done in increments or all in at the beginning.


In the "cheat year", I see it coming together a lot faster than in a non-cheat year similarly to the success of Alejandro Carrillo.

Robert Ray wrote:
If there is a mountainous component in the 10k what is that size. Its use would be far different as far as flat ground pasture. That difference would also influence AU productivity. What is the true topography? If there is an elevation component now, we can add many other water saving/gathering components. If so, area of and elevation information. Knowing where the mountainous area is on the projects site might influence rain and rain shadow influence computations.


The Mountains are larger than a MN ski mountain.
1k AU is just a starting number, plan to up it when the hay supplementation can go away.

Robert Ray wrote:
Since we are talking creating a forage source I am puzzled by the fear of plant oxidation creating a fire hazard. To bring the proposed 1AU per acre there is going to be seasonal plant material on the site. My research into the Australians and Argentina impression trial sites made no reference to increased fire danger being a concern. It appears in fact that there is increased water retention, that would decrease fire hazard. I found no fire dangers concerns in the PDF papers from the US as of yet.


Even if you can't see the root, or leaves doesn't mean the plant/tree is dead.
The plant oxidation is a mention to Alan Savory, and when the animals came back the grass stayed green and less flammable.

Robert Ray wrote:
What state? Knowing this would help in making comments on what the water Gods of that state allows.


US part of the Chihuahuan desert.

Robert Ray wrote:
State of Emergency Flood Plains usually are in areas in which infrastructure, populations and escape routes are in jeopardy "during" a flood. Right now the S.W. is getting hammered. Is your project site close to a population center? Major highway? Utility infrastructure? What components will support an Emergency Flood Plan request that could release monies to implement and enhance your project?


The state of emergency I'm talking about is only when ranchers fail to plan for flooding. Look into Gabe Browns ( https://www.ted.com/talks/gabe_brown_how_regenerative_agriculture_brings_life_back_to_the_land ) water infiltration story. Imagine that happening in the desert.

Robert Ray wrote:
This is a huge admirable project. Getting a true sense of budget, location, topography will allow folks to drill down to suggestions that are pertinent to your goals and location.


Thanks, just need to ask all my questions to hit the ground running as fast as possible saying "try this", "do this".
 
Robert Ray
gardener
Posts: 3655
Location: Cascades of Oregon
1106
  • Likes 2
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Oy Kevin, We all want to see you succeed. But to get solid input will help us.

Just to solidify.

What is your experience with cattle? What is your experience with farming?  No previous experience isn't a bad thing a solid plan will be needed.

You have not yet been on site.

High mountain strip mine? Is the strip mines area on the flat? You mentioned amount of material removed? Cessation of mining requires restoration in the US. What does amount of material removed mean. Was the site not restored?

What construction disturbance was caused with a proposed data center not on the property? If the disturbance of a proposed data center is so great that it has influenced the aquifer it is was more than proposed. In reference to the project site, proximity and topography of the disturbed proposed data center location would help. Extent and type of disturbance? Dunal aquifers in the area with an aquitard have relatively shallow depths. You haven't mentioned dunes so I am assuming that the ground is not purely sand. Non Dunal areas have a much deeper depth to aquifer depending on location and geology up to several hundred meters deep.

Your water rights you have explained come from a river. Are you also drawing by well from the aquifer? That would be an important piece of information.

10k of flat ground great, now how much more is added with the mountainous component. What an incredible addition to the scope of the property, and its potential.

A poster from Australia asked a question and in your comment you said "Do you follow Federal Policy much" being from outside the US he probably doesn't. But he does live in an arid climate and probably has on the ground real time/experience for input.

What diseases are you concerned with? I still fail to see the Stamet connection and the need in the initial proof of concept with your project. There is no current Ecoli issue and if it does become one then you can implement mushroom remediation. Something that can be stacked on should the need arise as your AU's increase.

40 mil budget. "Yes the works" What does that mean? 40 mill absolute budget. Absolute budget meaning that is it in total. Or 40 mil plus? If it is 40 mil plus what is the plus? Equipment, housing, cattle?

Wow more than 1AU per acre. An incredible goal.

Ok first year, what do you see happening. Your first step.

Can you share with me how plant oxidation and the imprinting of grass seeds will increase fire hazard. The papers indicate the opposite to date. The imprinting depression help retain surface water and green vegetation. Savory and the return of cattle to a grazing site is a bit different than the imprinting reference.

It sounds like a State of Emergency Flood Plain would be something entirely different from what you are looking for. Addressing local erosion on private property might need some type of permitting but if it does not meet those emergency standards a declaration of an emergency in all likelihood would not happen and not open up the State or Fed wallets. Depending on the State, funds might be available to address erosion issues.

What State, Holy Moly, water rights, available grants, legal hurdles, all are different in NM, AZ, TX. What State Kevin?

You indicate that there is an NDA once you begin how is that Non Disclosure Act going to impact your project. How is that NDA impacting your research? It hampers getting answers here. Did the NDA have any issue with your conversation with the County Clerk? When does the NDA conclude. Maybe asking for input with an NDA currently in place is too soon.


Circular answers don't help. "The mountains are larger than a MN ski mountain", doesn't give us any help. How much more mountain property is now included? Some little tid bit of topography.
How the river flows through the site, relationship of river path and flat vs mountain.

I'm sure your mind is racing with a project this size. Don't add on components that are not an immediate issue. Ecoli and mushroom remediation is not something in the mix yet. Erosion is something that might be addressed as you determine how you are going to direct water. Erosion might be addressed as you work in the new mountain component. Boots on the ground and an in-person assessment will be great.


 
Posts: 152
56
gear fiber arts building
  • Likes 2
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Im afraid for this project.

It has taken a week of back and forth for kevin to begin to describe the bare minimum outlines of what he has in front of him...and what has come out is far beyond the outer reaches of DIY unless it becomes his life work to be a backcountry backhoe operator-cum-phd-hydrologist until death.

So communication with the people who *will inevitably* be helping is foundational and fundamental to the work getting done. If communication is like this with workers onsite I fear nothing valuable will ever get done. At best  huge amounts of time will be wasted before someone else creates the plan that's missing here.

A project this size is well beyond a single person and starts with a toppgraphic map (or hiring a surveyor to make one) and an engineer (or team of engineers!) qualified in either the water flow or earth moving aspects, or both. It will then need a hydrologic model for the expected sources of annual and ephemeral water flows, and that model is probably going to be an involved one given the water flows involved and the desire to spread a river efficiently over 20 square miles + without a pumping/irrigating infrastructure. Swales are a wonderful thing but if OP has an actual river they will be eroded to nothing in short order. Permaculture knows about swales but a 20 square mile custom river watershed is beyond any expertise i have seen demonstrated here. Its not like an orchard but scaled up.

Without some basic knowledge of the terrain its impossible to give accurate advice. Various mixtures of mountain and stripmine across 10k acres lead to very different solutions.

It could be anything from "connect these two existing drainage ditches with one backhoe" to "a team of 100 backhoes working for a year" to "this is a federal superfund site filling an acid mine drainage lake, take your topographic map to the EPA and set up an in person meeting"

For all we know, the original heavy equipment access to the site is degraded or doesnt reach the important areas for drainage. this site may be reachable only by helicopter or snowmobile and heavy equipment is out of the question.

Bottom line: it sounds like this project is not ready for solutions. The problem has yet to be clearly described. FOr a person with decision authority over something so massive, Kevin will need to start with maps an elevator pitches training himself to describe the problem before he can get to solutions...or else his workers (and it sounds like he may be hiring hundreds) will not understand what to do and lots of money may be wasted.
 
Robert Ray
gardener
Posts: 3655
Location: Cascades of Oregon
1106
  • Likes 5
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
I'm tired boss, can't intelligently answer without the full meal deal. This is becoming a circular conversation that will have no end without getting more data. Wishing you success Kevin.
i-am-tireed-boss
[Thumbnail for i-am-tireed-boss]
 
John C Daley
pollinator
Posts: 6374
Location: Bendigo , Australia
614
plumbing earthworks bee building homestead greening the desert
  • Likes 6
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
I refuse to work anywhere that mentions  Non Disclosure Agreements, they are not agreements, they are demands.

Non disclosure of basic facts of the project may be the cause of all the confusion as Daniel has mentioned.
I hope to remain simply an observer of process here, to see if anything actually is achieved.
So far the process has failed to achieve anything other than more confusion.
 
I wish I could be half as happy as this tiny ad!
better than an outhouse, and can be indoors
https://www.richsoil.com/willow
reply
    Bookmark Topic Watch Topic
  • New Topic