When I visited wheaton labs in early June I found out that there was a half finished rocket oven near Seattle, languishing on a shop floor. I felt that there is a whole audience/market for rocket ovens that is likely to be turned off by their sort of steampunk aesthetic.
Say, a family of four living in Portland, with a cob oven next to their deck. Turns out they've had 4 pizza parties in 5 years (and 2 of them were in the first summer) because it's kind of a pain to heat that thing up, and the neighbors don't like the smoke. And yet, when I tell them about how cool a rocket oven is, they look at the sideways barrel on a metal framed heat riser and say "Yeah, no. I don't want that in my back yard."
So, I arranged to buy the half finished oven, for a different installation. A permanent installation next to the deck of the ranch house at Ten O'Clock Acres.
Here's the plan: we're going to encase the oven body in a box, and cover that box with mosaic. Ironically, I came up with mosaic because I thought of it as a heat resistant art form, but as it turns out the box is made of plywood (well insulated from the fire - have no fear) covered in duraboard and then tile.
So, we prepared the front panel. I covered the duraboard with black thinset mortar, to help me visualize the design, since I'm planning a dark grout.
There will be mosaic on the side panels as well, but at the rate I'm going I don't know when those will be finished.
(Maybe if I buy more little precut mosaic tiles. See, what you see used above is bits of a bowl that I cut up using tile nippers, and pieces of bathroom tile (the white and yellow) or mirror (the outermost row) that I cut with either those same nippers or by scoring and breaking with a glass cutter. When you make your own tiles, mosaic is a very slow and involved process.)
I'll add a picture of the oven taken from the side, so you can see how it's got a big shed roof, to keep the pizza cook mostly dry if it's raining.
Julia, this is a great solution to the beautification of the humble oven inside! It's also an accessible sort of project for many folks, cheap/free materials, entry-level skill requirements, and endless possibilities for designs.
The best part, however, is selling the rest of the family/household on the oven. Just how you lucked into your oven, the NIMBY potential for bricks and tin over a barrel is strong.
Keep on posting updates! (you had another photo of further progress in another thread?)
This may be how I get to put my oven (which I'm building regardless!) in a prominent location. ;-)
Amy has been wanting to do a mosaic project for a long time now... this could be it!
Nails are sold by the pound, that makes sense.
Location: Moved from south central WI to Portland, OR
You're right Kenneth, there's more to show! I'm building this thread as I find the time.
Mosaic can be made from lots of things. I started out using found materials and breaking them into bits. I also found a place, https://mosaicartsupply.com/ and made a small purchase (you can see it in the plastic bags).
When I started to work, I had to spread out what I had:
On Sunday the 12th, my teen daughter and I had a pajama party, where we camped out at the farm (the ranch house has one toilet that works, no sinks that drain, but it does have cold water via the kitchen faucet - you just have to catch the water in a bucket) and worked on the mosaic. We were hoping to see shooting stars from the Perseid meteor shower, but that was a bust. I saw one.
Still, we watched a couple of episodes of the first Queer Eye season, and had a good time!
We got this far that night (mosaic is a slow process). I did apply a tip I'd picked up from a book: loading the thinset mortar into a ziplock bag with the corner snipped off. This made it easier to apply thinset mortar to the tile pieces. Previously I was dipping a stick and awkwardly dabbing it onto the backs of the tiles.
The big slowdown here is that most of these mosaic pieces I'm cutting from larger tiles or even from pottery. When there were two of us, I was cutting tile and laying it out, and my daughter was gluing the pieces down with the thinset mortar.
Then two nights ago we had a little pizza party and I stayed behind to keep working on the mosaic. I watched 4 more episodes of Queer Eye (love those good good boys) and got a few more rounds down. I'm getting to where I have to do a fair amount of tiny tile cutting to fit within the borders of the planned wooden trim:
And then finally, it was finished. OK, it's not really finished. It needs to be attached to the rocket stove frame, and I plan to grout it after it's up. I'm thinking I will stain the grout blue. I was surprised how much a few rows of bland colored tile brought the brightness of the whole thing down:
Incredible project, thanks for sharing. The bag idea is great too. What a fun family project and Queer Eye watching to boot. Awesome. Wait'll you get to season two. The church episode is a tear jerker for certain.
What a great idea Julia! Thanks for sharing the progress.
A lot of people have asked about the j tube and frame. Based on what you've done, it seems like you can build the frame out of wood or whatever material works if it's a permanent installation. Is that the case? As long as the weight is supported?
I'm thinking of building the full 4' high riser, but eventually burying the bottom of it (wood feed/ burn tunnel) in an area next to my deck that I'll be laying brick or stone in anyways. So the wood feed will be flush with the ground, reducing the overall height. And then I'll figure out the frame. Since it's not really portable, there's no need to weld together that steel frame, and wood or something else will be much easier to construct.
Look forward to seeing yours completed.
Location: Moved from south central WI to Portland, OR
Yes, I think the frame can be built of wood, as long as things are well supported and also shielded from heat.
We built our heat riser from brick, and the plan is to cob over the outside of the whole thing. To be more precise, the plan is to wrap it in chicken wire and then cob over it, incorporating the chicken wire that is all across the bottom of the frame, to keep out critters.
This is out at the farm, and I don't get to go there when I'm on call for a week at a time, but this past weekend I went out there to see, and take my own pictures. Here you can see our Beauceron, Tilly, and one of the steers in the background. We have 7 Dexter cattle: a young bull, a heifer, an experienced cow and her calf, and finally three steers from a different farm that was dissolving their herd.
There's still a lot more to do. I need to find all the tiles that fell off in the moving process and re-attach them. I need to grout the piece, and then it would be smart to waterproof it in some way. I want to tile the other three sides of this box. The whole thing needs to be trimmed, and the roof needs to be shingled and trimmed. The bottom part needs to be wrapped in chicken wire and cobbed.
Also, right now the door bumps into the first row of tile when you open it. I'm going to have to chip away at or remove a couple of tiles so that the door can open past flat, for easy access inside.