Someone flagged this submission as not complete. BBV price: 1 Note: Sorry Alex, it's tough but we need better before/after pics to see that it's actually sharp
Someone flagged this submission as not complete. BBV price: 1 Note: Perhaps if the metal filing were wiped off & another pic taken with a sl;ight different angle from the light this would pass. Good clear pix are the hard part on this BB.
This is a badge bit (BB) that is part of the PEP curriculum. Completing this BB is part of getting the sand badge in tool care.
Minimum requirements:
- sharpen all the teeth on a chainsaw chain ✔️
To get certified for this BB, post three pics:
- action pic of sharpening
- closeup of a tooth that is really dull
- another closeup of the same tooth - nice and sharp!
Here is a video of me sharpening a chainsaw chain. Blessings Catherine
Someone flagged this submission as not complete. BBV price: 1 Note: This BB requires 3 pictures instead of a video. The final picture of a sharpened tooth is the most critical.
- action pic of sharpening
- closeup of a tooth that is really dull
- another closeup of the same tooth - nice and sharp!
I sharpened WL chainsaw #606: it needed lots of love. I also cleaned out tree bits from the inside casing and filled it up with bar oil, so it's ready to go again!
(Adding missing after tooth 1 pic)
20260328_084331.jpg
All my tools assembled
20260328_091146.jpg
Stephen advised me to use the vise for sharpening
20260328_091614.jpg
Before tooth 1
20260328_092806.jpg
Before tooth 2
20260328_092928.jpg
After tooth 2
20260328_093637.jpg
After, all teeth clean and sharp! Be sure to floss!