John Daley Bendigo, Australia The Enemy of progress is the hope of a perfect plan
BENEFITS OF RAINFALL COLLECTION https://permies.com/t/88043/benefits-rainfall-collection
GOOD DEBT/ BAD DEBT. https://permies.com/t/179218/mortgages-good-debt-bad-debt
SOIL REHABILITATION IDEAS https://permies.com/t/392436/farmland-rehabilitation-variety-examples#4005866
Proudly presenting RocketMassHeaters.com
A good starting point to all RMH research
How Permies.com works
John C Daley wrote:I dont think plaster touching the insulation will be a problem, because the work of insulating takes place within the wool itself.
Lathe and plaster seems over the top when sheets are available now?
John Daley Bendigo, Australia The Enemy of progress is the hope of a perfect plan
BENEFITS OF RAINFALL COLLECTION https://permies.com/t/88043/benefits-rainfall-collection
GOOD DEBT/ BAD DEBT. https://permies.com/t/179218/mortgages-good-debt-bad-debt
SOIL REHABILITATION IDEAS https://permies.com/t/392436/farmland-rehabilitation-variety-examples#4005866
Maggie Quinn wrote:My concern was that it wouldn’t form a proper “key” to the lath. I was thinking of possibly stapling the wool (sheep’s) to hold it down a little bit to possibly leave some extra room for the key
Proudly presenting RocketMassHeaters.com
A good starting point to all RMH research
How Permies.com works
Maggie Quinn wrote:Thanks everyone for replying. I know it does seem overkill haha I’m mostly doing it to have my hand at plastering. We’re going to use traditional lime plaster, 3 coats is what I’m told. My concern was that it wouldn’t form a proper “key” to the lath. I was thinking of possibly stapling the wool (sheep’s) to hold it down a little bit to possibly leave some extra room for the key. I’ll let you know how that goes!
-Maggie
My suburban building and homesteading blog https://offgridburbia.com/
Benjamin Dinkel wrote:
Maggie Quinn wrote:My concern was that it wouldn’t form a proper “key” to the lath. I was thinking of possibly stapling the wool (sheep’s) to hold it down a little bit to possibly leave some extra room for the key
I would't compress the insulation. It needs to be fluffly to do it's job.
When you apply the first layer of plaster make sure your plaster penetrates. That is make it somewhat more liquid and actually use pressure while applying.
Did you already install all the lath?
Did you look up what distance the lath usually was installed at?
Cristobal Cristo wrote:Are you going to install laths on the studs first?
|
Well THAT's new! Comfort me, reliable tiny ad:
the next generation of humanure
https://www.richsoil.com/willow
|