• Post Reply Bookmark Topic Watch Topic
  • New Topic
permaculture forums growies critters building homesteading energy monies kitchen purity ungarbage community wilderness fiber arts art permaculture artisans regional education skip experiences global resources cider press projects digital market permies.com pie forums private forums all forums
this forum made possible by our volunteer staff, including ...
master stewards:
  • Nancy Reading
  • Carla Burke
  • r ranson
  • John F Dean
  • paul wheaton
  • Pearl Sutton
stewards:
  • Jay Angler
  • Liv Smith
  • Leigh Tate
master gardeners:
  • Christopher Weeks
  • Timothy Norton
gardeners:
  • thomas rubino
  • Jeremy VanGelder
  • Maieshe Ljin
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
This is a badge bit (BB) that is part of the PEA curriculum. Completing this BB is part of getting the sand badge in Roundwood Working.

Working in an apartment often means getting by with tools that aren’t entirely perfect for the job. So often tasks that apply to permaculture on large tracts of land mean large tools. Thankfully fermentation is not one of those tasks. A simple sauerkraut stomper will be a tool that works just as well on a farm as in an apartment. Carve one from a single piece of wood to fit in a wide-mouth jar so you can easily make sauerkraut or similar fermented foods more readily. If you happen to have a pole lathe, you may use that, but remember that this should be made without power tools.

To complete this BB, the minimum requirements are:
Carve a sauerkraut stomper from a single piece of wood.
Make sure the head is suited to a wide-mouth jar.
Ensure the handle length is long enough so that you can easily hold it and withdraw it even when it is fully within the jar.
Should be carved with manual hand tools.




To document and become certified for this BB provide photos or video (less than 2 minutes) showing the following:
- Show the original piece of wood and the tools you will be using
- Show the tool after it is partially finished, at around the halfway point
- Show the finished stomper in a jar or in use making sauerkraut
COMMENTS:
 
pollinator
Posts: 1495
855
2
trees bike woodworking
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Approved submission
1) Headed to the woods to look for a suitable branch. It needed to be the right thickness, reasonably straight, seasoned but not rotten and still strong. I found several candidates but they easily snapped or had fungi growing on them on closer inspection. Eventually I found a long tulip tree branch and cut a section for making a sauerkraut stomper.





2) Strip all the bark and smooth of the knots with hand axe



3) Remove the first layer of wood and round off the ends with with a whittling knife.



4) Remove the bulk of the wood for the handle with hand axe



5) Finish with whittling knife, then 80, 120, 240, 320 sandpaper.



6) Stomper finished in a 1 quart jar



I will treat it with walnut oil and then make some sauerkraut.
Staff note (gir bot) :

Mike Haasl approved this submission.

 
master gardener
Posts: 4249
Location: Upstate NY, Zone 5, 43 inch Avg. Rainfall
1721
monies home care dog fungi trees chicken food preservation cooking building composting homestead
  • Likes 2
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Approved submission
To complete this BB, the minimum requirements are:
Carve a sauerkraut stomper from a single piece of wood.
Make sure the head is suited to a wide-mouth jar.
Ensure the handle length is long enough so that you can easily hold it and withdraw it even when it is fully within the jar.
Should be carved with manual hand tools.

To document and become certified for this BB provide photos or video (less than 2 minutes) showing the following:
- Show the original piece of wood and the tools you will be using
- Show the tool after it is partially finished, at around the halfway point
- Show the finished stomper in a jar or in use making sauerkraut

I had a piece of box elder that I wanted to carve for a while now. Fun enough, half of the wood started to dry while the bark piece was still green. This made carving a challenge as the green wood peeled nicely while the dryer piece was more like chip carving. I managed to still get a decent end product. I am planning on using it for the larger canning jars that will be utilized for fermentation or pickling. I found what at first was a challenge of having branch stubs turned into a natural handle hand hold piece which was neat.
Muddle1.jpg
Raw wood.
Raw wood.
Muddle2.jpg
Carve
Carve
Muddle3.jpg
Carve
Carve
Muddle4.jpg
Carve
Carve
Muddle5.jpg
In a large widemouth finished.
In a large widemouth finished.
Muddle6.jpg
In hand finished.
In hand finished.
Staff note (gir bot) :

Tina Wolf approved this submission.
Note: Great job!  Love the different colors in the wood!

 
LOOK! OVER THERE! (yoink) your tiny ad is now my tiny ad.
Heat your home with the twigs that naturally fall of the trees in your yard
http://woodheat.net
reply
    Bookmark Topic Watch Topic
  • New Topic