This is a badge bit (
BB) that is part of the
PEP curriculum. Completing this BB is part of getting the sand badge in
Animal Care.
In this badge you will be performing a routine inspection of your 4 Legged Animals' food,
water, production quality, and overall habitat.
Step 1: Check Their Water Source
- Rinse out the basin/nipples for their waterer. If there is signs of build up/grossness wash out the waterer with your choice of cleaner.
- Check to make sure the water source is full/ample.
- Visual inspection of their water quality; looking for signs of rusting, inappropriate algal growth, and other gick. If found address the problem.
Step 2: Check Their Food Source
- Check that their feeder is full. (If forage
feed only, describe how you check they are getting ample feed.)
- Check feed stock for mold, unwanted moisture, or sign of rodents/pests.
Step 3: Animal Check
- Inspect animals for health and production of your desired animal product
Step 4: Safety/Wellness Check
- Inspect
shelter (if present) for quality of bedding. If poor, change over/add additional bedding/address the problem.
- Inspect shelter for sharp objects & over head hazards (protruding nails, staples, loose
chicken wire, unaffixed heavy objects, ect). Address any problems identified.
- Inspect shelter and surrounding area for signs of predators (dig marks, holes in fencing, scat, ect). Address any problems identified.
To complete this BB, the minimum requirements are:
- Complete and document a routine daily check for your 4 Legged Animals
To document the completion of the BB, provide the photos or
video (<2 min) of the following:
- Photos/video of your animal waterer before and after your check.
- Photos/video of your animal feed/feeder before and after your check.
- Photos/video of your animal check
- Photos/video of your shelter before and after a safety/wellness issue was addressed