Forums Login/signup

Build 12 feet of junkpole fence - PEP BB woodland.sand.fence

BB woodland care - sand badge
(1 apple) 1
+Pie Number of slices to send: Send …
Approved submission
I built this 12' section of junkpole fence uphill from the Fisher Price house, in between two rock jacks the boots kindly set up. I used an assortment of junkpoles that had been cut and collected in earlier activities and were stacked in the area. I used screws for the attachments--toenail joints for the horizontal beams connecting to the rock jacks and single screws for the vertical supports between the rock jacks.

By the time I was done the fence was backlit by the evening sun, which doesn't give the best impression about its chicken-proofness. However the gaps between the junkpoles and the rock jacks are much too small for a chicken, and overall it's pretty tight. I couldn't squeeze another junkpole in anywhere.

I'm attaching a photo of the space without the fence, the initial grid of horizontal and vertical supports, the toenail joints with flattened facing surfaces for the lower horizontal beams' connection to the rockjack posts, the single screw connection of a vertical to the horizontal, and the finished fence.
12-foot-space-before-junkpole-fence.jpg
The space prior to building the fence
[Thumbnail for 12-foot-space-before-junkpole-fence.jpg]
Horizontal-and-vertical-grid.jpg
Initial grid of horizontals and verticals, attached with screws
[Thumbnail for Horizontal-and-vertical-grid.jpg]
Lower-horizontal-beam-toenail-screws.jpg
Lower horizontal beam with two screws, toenail fashion
[Thumbnail for Lower-horizontal-beam-toenail-screws.jpg]
Upper-horizontal-beam-toenail-screws.jpg
Upper horizontal beam with two toenail screws
[Thumbnail for Upper-horizontal-beam-toenail-screws.jpg]
Lower-horizontal-joint-with-facing-surfaces-flattened.jpg
I flattened the facing surfaces of the horizontal beams and the rockjack vertical so the fit would be tighter and the fence more stable
[Thumbnail for Lower-horizontal-joint-with-facing-surfaces-flattened.jpg]
Vertical-next-to-junkpole-with-a-single-screw.jpg
This is the first vertical piece next to the rockjack, screwed to the upper horizontal with a single screw
[Thumbnail for Vertical-next-to-junkpole-with-a-single-screw.jpg]
Finished-junkpole-fence.jpg
Here is the finished fence section
[Thumbnail for Finished-junkpole-fence.jpg]
Staff note (gir bot) :

Someone approved this submission.
Note: I certify this badge bit complete.

(1 apple) 1
+Pie Number of slices to send: Send …
Approved submission

Here is my submission for PEP BB Building 12 feet of junkpole fence

Minimum requirements:
  - Deer proof (eight feet high)
  - Will hold chickens in (no gaps that a layer hen could get through)
  - Joinery that will last at least seven years

To get certified for this BB I am posting the following as pics:  
  - Area without a fence
  - Fence under construction
  - Completed fence
  - Show details of every type of joint

I also built one of the rock jacks for this project: permies.com/p/1499462
build_12_ft_of_junkpole_fence0421.JPG
area without a fence
[Thumbnail for build_12_ft_of_junkpole_fence0421.JPG]
build_12_ft_of_junkpole_fence0431.JPG
under construction
[Thumbnail for build_12_ft_of_junkpole_fence0431.JPG]
build_12_ft_of_junkpole_fence0471.JPG
completed fence
[Thumbnail for build_12_ft_of_junkpole_fence0471.JPG]
build_12_ft_of_junkpole_fence0429.JPG
joints with single screws for narrower poles
[Thumbnail for build_12_ft_of_junkpole_fence0429.JPG]
build_12_ft_of_junkpole_fence0427.JPG
two screws toenailed for verticals
[Thumbnail for build_12_ft_of_junkpole_fence0427.JPG]
build_12_ft_of_junkpole_fence0430.JPG
toenailed joint on the left, single screw fastened on the right
[Thumbnail for build_12_ft_of_junkpole_fence0430.JPG]
Staff note (gir bot) :

Someone approved this submission.
Note: I certify this badge bit complete.

+Pie Number of slices to send: Send …
Approved submission
I just finished setting up another junk-pole fence on the back of our garden area. I've definatley seen nicer looking fences, but it shall do it's job well
FENCE.JPG
starting poles
[Thumbnail for FENCE.JPG]
fence2.JPG
the hammer
[Thumbnail for fence2.JPG]
fence3.JPG
support beams in place
[Thumbnail for fence3.JPG]
fence-4.JPG
almost done!
[Thumbnail for fence-4.JPG]
fence5.JPG
done!
[Thumbnail for fence5.JPG]
Staff note (gir bot) :

D. Logan approved this submission.

(1 apple) 2
+Pie Number of slices to send: Send …
Approved submission
Built an 11' 3ish" fence for our side garden. I started with screws but needed something stronger (and longer) so I switched to 6" nails. I was very pleased with how it looked! The place where I used screws with the joinery, I went back and added nails too for support.
IMG_0124.jpg
Garden needing fencing
[Thumbnail for IMG_0124.jpg]
IMG_3094.jpg
Under construction
[Thumbnail for IMG_3094.jpg]
DSCN1405.JPG
Complete
[Thumbnail for DSCN1405.JPG]
DSCN1406.JPG
Joinery
[Thumbnail for DSCN1406.JPG]
DSCN1408.JPG
Joinery with added support
[Thumbnail for DSCN1408.JPG]
Staff note (gir bot) :

Someone approved this submission.

+Pie Number of slices to send: Send …
Approved submission
I built a junkpole fence.
20240717_091346.jpg
The stretch of area to be fenced
[Thumbnail for 20240717_091346.jpg]
20240717_091339.jpg
Paul gives me a thumbs up at 12 feet
[Thumbnail for 20240717_091339.jpg]
20240717_105604.jpg
Cross beams up
[Thumbnail for 20240717_105604.jpg]
20240717_111731.jpg
This is a saddle joint with toenail nails
[Thumbnail for 20240717_111731.jpg]
20240717_111749.jpg
This branch had to be shaved down quite a bit so the nails could reach
[Thumbnail for 20240717_111749.jpg]
20240720_094204.jpg
About halfway. I nailed every 10 poles or so to the fence crossroads so they would help keep the others upright. There is a significant slope to this 12 foot section.
[Thumbnail for 20240720_094204.jpg]
20240720_101123.jpg
Finished section
[Thumbnail for 20240720_101123.jpg]
Staff note (gir bot) :

Jeremy VanGelder approved this submission.

+Pie Number of slices to send: Send …
Approved submission
This was both easier and more challenging than I expected.
Easier to construct - once you have your horizontals and spacers, tucking in the poles was quick

Harder to acquire material - I was in an awkward position on the far side of the laundry area, north east of both the Fischer Price House and Yurt; I had to haul in everything from a hundred yards away, one load at a time

Thankfully, both rock jacks were in and most of the junk poles had been cut in the past.
IMG_0253.jpeg
Area without fence
[Thumbnail for IMG_0253.jpeg]
493F547C-3874-43BD-9078-C88A142D0C5F.gif
Haulin logs with a rope “backpack”
[493F547C-3874-43BD-9078-C88A142D0C5F.gif]
IMG_0328.jpeg
Construction
[Thumbnail for IMG_0328.jpeg]
IMG_0329.jpeg
Done!
[Thumbnail for IMG_0329.jpeg]
IMG_0310.jpeg
Making joint with The Wizard
[Thumbnail for IMG_0310.jpeg]
IMG_0315.jpeg
Saddle joint for the win
[Thumbnail for IMG_0315.jpeg]
IMG_0314.jpeg
Bonus pic of another saddle joint, toenail holes can be seen on the left
[Thumbnail for IMG_0314.jpeg]
Staff note (gir bot) :

Someone approved this submission.
Note: I certify this badge bit complete.

What's wrong? Where are you going? Stop! Read this tiny ad:
better than composting toilets
https://www.richsoil.com/willow
2023 Permac Adventure bundle Free heat movie Better wood heat kitty purple


reply
reply
This thread has been viewed 13844 times.
Similar Threads
Repair 24 feet of junkpole fence - PEP BB woodland.sand.repair
Build a Junkpole Fence Around a 1-Acre Plot w/ 4 Gates w/ Latches - woodland.iron.junk PEP BB
Uses for small diameter pine
120 Feet of Junkpole Fence with Good Gate and Latch - woodland.wood.junkpole PEP BB
Prep 10 junkpoles - PEP BB woodland.sand.junkpole
Podcast 759 - Permaculture Smackdown 33 - Beyond Organic Eggs - Part 2
Permaculture Voices 1, 2 and 3 - all 117 hours of video!
Come Visit Wheaton Labs!
Rocket mass heater combo COMBO
More...

All times above are in ranch (not your local) time.
The current ranch time is
Oct 31, 2026 12:09:02.