• Post Reply Bookmark Topic Watch Topic
  • New Topic
permaculture forums growies critters building homesteading energy monies kitchen purity ungarbage community wilderness fiber arts art permaculture artisans regional education skip experiences global resources cider press projects digital market permies.com pie forums private forums all forums
this forum made possible by our volunteer staff, including ...
master stewards:
  • Nancy Reading
  • Carla Burke
  • r ranson
  • John F Dean
  • paul wheaton
  • Pearl Sutton
stewards:
  • Jay Angler
  • Liv Smith
  • Leigh Tate
master gardeners:
  • Christopher Weeks
  • Timothy Norton
gardeners:
  • thomas rubino
  • Jeremy VanGelder
  • Maieshe Ljin

Help! Garden shed blown over by storm!

 
pollinator
Posts: 3089
Location: Meppel (Drenthe, the Netherlands)
1018
dog forest garden urban cooking bike fiber arts
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Dear Permie-people, I need some help. Of course most of you can not come to the Netherlands to help me with their muscle power. But you can give good advice.
My son is busy (in his spare time) building a garden shed in my allotment garden. He's using pallet wood (he can get the pallets from his work). The largest part is finished and it's sturdy and strong ...
... but then the storm came (named Eunice) ... in the night of February 18 - 19 (2022) my garden shed is completely blown over! Upside-down on its roof! This wind must have been very strong (maybe it even was a little like a hurricane)! My sons estimates the weight of the shed about 500 kg (1100 lbs).

Now is the problem: how to get it back upright again???

And then we'll have to 'anchor' it to the ground. That underground exists of a sand-peat mixture (in the past this was a boggy place). So not just any method of fixing a building to the ground can be used there. F.e. wood in the ground will rot too fast. What do you advice?
 
pollinator
Posts: 2339
Location: Denmark 57N
598
fungi foraging trees cooking food preservation
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
I would advise getting something like this


They come in many different sizes, putting 6 or 8 of them down and then attaching the shed to that. If you want to make it really secure then concrete the holders in, but personally I wouldn't bother.
 
steward
Posts: 16058
Location: USDA Zone 8a
4272
dog hunting food preservation cooking bee greening the desert
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
If that was my building I would get a "Come a Long", we have one.

https://www.amazon.com/Come-Along-Tool/s?k=Come+Along+Tool

And Rope.  And maybe 3 or 4 guys to hold the building steady.

The "Come-a-long" needs to be anchored to a tree or a car or something.

Attach the rope to the building. Then to the come along.

When working the handle of the come-a-long will slowly moving the building until it will be pulled onto its side.  

Do that again and maybe the building will now be right side up.

some of the male forum members might explain this better than I can.



https://en.wikipedia.org/wiki/Come-along
 
gardener
Posts: 5436
Location: Southern Illinois
1487
transportation cat dog fungi trees building writing rocket stoves woodworking
  • Likes 6
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Inge,

I am thinking that you use T-stakes and come alongs.  First I would pound a couple of stakes into the ground (but be able to get them out later.  Then I would attach a come-along on the stake close to the ground and again to the highest point of your shed.  Then crank and slowly rotate the shed back onto its correct orientation.

After the shed is upright I would think about pounding stakes along each corner—that is two per corner for a total of eight stakes.  And I would make them tall, sturdy stakes as in maybe 2 meters.  I would pound those stakes in as far down as I could get them but at least 1 meter.  Finally I would attach the stakes directly to the framing of the shed.  Don’t just attach to the siding as that comes off, but I would go right to the structural members of the shed so that the whole structure is well and thoroughly anchored to the ground.

At least this is what I would do.  I hope it helps.

Eric
 
Inge Leonora-den Ouden
pollinator
Posts: 3089
Location: Meppel (Drenthe, the Netherlands)
1018
dog forest garden urban cooking bike fiber arts
  • Likes 2
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Thank you for your tips.
A come-along looks like something useful for this job. So I hope to find someone who has it and can help. A strong car (like a jeep) would be helpful too ...

And then I think I need large pointed metal things that go into the ground. And concrete added in the hole. Those metal pins has to be attached to the frame of the shed, yes. No wooden stakes, they will rot.
 
Eric Hanson
gardener
Posts: 5436
Location: Southern Illinois
1487
transportation cat dog fungi trees building writing rocket stoves woodworking
  • Likes 2
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Inge,

A T-stake is not wood.  It is made of steel so it won’t rot on you.  I wouldn’t recommend an option that would rot so easily.

Eric
 
Inge Leonora-den Ouden
pollinator
Posts: 3089
Location: Meppel (Drenthe, the Netherlands)
1018
dog forest garden urban cooking bike fiber arts
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

Eric Hanson wrote:Inge,

A T-stake is not wood.  It is made of steel so it won’t rot on you.  I wouldn’t recommend an option that would rot so easily.

Eric


Thank you. I searched for T-stakes now on the internet. I see those stakes for (electric) fences. Are those what you mean?
 
Eric Hanson
gardener
Posts: 5436
Location: Southern Illinois
1487
transportation cat dog fungi trees building writing rocket stoves woodworking
  • Likes 2
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Inge,

Try this link:

https://www.homedepot.com/p/Everbilt-1-3-in-x-1-3-in-x-5-ft-14-Gauge-Powder-Coated-Steel-Fence-U-Post-901155EB/205960883

A steel T-Stake is meant for regular fencing and is quite sturdy and strong.  It will not bend easily.  It can be purchased in several lengths and thicknesses.  Amazon has several varieties, but I would choose one that is fairly long (2 meters) and thick/heavy gauge.  It is not meant for electric fencing.

Eric
 
Eric Hanson
gardener
Posts: 5436
Location: Southern Illinois
1487
transportation cat dog fungi trees building writing rocket stoves woodworking
 
Posts: 24
Location: Zone 7a, Alabama
5
9
hugelkultur food preservation woodworking
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Might be a good use of a flip flop winch.
https://youtu.be/QFDGGht3CQU

Could easily use 2, pull with one and hold while attaching second one. Pull with second one and hold while you reattach first one till you have it rolled over.
 
steward
Posts: 15505
Location: Northern WI (zone 4)
4846
7
hunting trees books food preservation solar woodworking
  • Likes 4
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
At least it flipped over without getting smashed to bits!

Do you have a neighbor with a tractor?  That could pull it easier than a come-along or winch.  Whatever you use, I'd tie onto it in the two corners of the building on the upper left of the picture.  Don't tie on in the center or it could buckle the shed.  Then pull it over 90 degrees.  Then reattach to the next corner and keep pulling.  If you can get a tractor or something with a front end loader on it, pulling from higher up will put less force on the shed.  Alternately, if you're pulling with a tree as your anchor, tie onto the tree up higher (assuming it's beefy enough).

Anchoring to t-posts or similar large metal posts would be a good plan.  I don't think Skandi's post base would be strong enough for uplifting wind forces.  Maybe I'm wrong...
 
Inge Leonora-den Ouden
pollinator
Posts: 3089
Location: Meppel (Drenthe, the Netherlands)
1018
dog forest garden urban cooking bike fiber arts
  • Likes 2
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Thank you for more advice.
If only I knew someone with a tractor ... I will ask around ... (maybe someone I know knows someone?)
I don't know if here in the Netherlands I can buy the things you show. Here instead of 'home depot' there are 'gamma' and 'praxis' (and some more).
 
Rocket Scientist
Posts: 4526
Location: Upstate NY, zone 5
574
5
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Re Mike's advice which sounds good to me, which direction did the shed flip from? Left or right in the picture? I would attach the cables/ropes to the corners on the far side from where you want to pull it over, so that as it starts to tip the lever arm gets longer and more effective. This would also be pulling the joints of the shed together rather than apart.
 
Anne Miller
steward
Posts: 16058
Location: USDA Zone 8a
4272
dog hunting food preservation cooking bee greening the desert
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
If you can't find the equipment, that Flip Flop Winch that  B Henry posted the Youtube video of might be the best if you can find round posts or logs.
 
pollinator
Posts: 1165
Location: Boston, Massachusetts
506
6
urban books building solar rocket stoves ungarbage
  • Likes 2
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Inge, I just mentioned a similar thing to Mike Hassl... screw pilings, or ground screws.
Here's a company in NL : stopdigging.nl

It may be totally overkill or out of the budget, but worth a look? Not sure if the salvage wood shed is by necessity or design.
Maybe a solution for someone else in a similar situation...
The installation equipment is small and maneuverable, which might suit you well, and it is ready to build upon once driven in, no waiting for curing of concrete.
 
Inge Leonora-den Ouden
pollinator
Posts: 3089
Location: Meppel (Drenthe, the Netherlands)
1018
dog forest garden urban cooking bike fiber arts
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

Kenneth Elwell wrote:Inge, I just mentioned a similar thing to Mike Hassl... screw pilings, or ground screws.
Here's a company in NL : stopdigging.nl

It may be totally overkill or out of the budget, but worth a look? Not sure if the salvage wood shed is by necessity or design.
Maybe a solution for someone else in a similar situation...
The installation equipment is small and maneuverable, which might suit you well, and it is ready to build upon once driven in, no waiting for curing of concrete.


Yes, we (my son, I mean) thought of these ground-screws ... but this is indeed much more than our budget. We need a DIY solution. Maybe there are smaller ground-screws one can turn in without a specialized machine?

After I wrote I don't know anyone with a tractor I realized I do know real farmers with tractors. But I can not bother them to drive the tractor to the allotment plot and do this for me, it will take too much of their valuable time. I want to pay them, but that's outside my budget too.

 
Inge Leonora-den Ouden
pollinator
Posts: 3089
Location: Meppel (Drenthe, the Netherlands)
1018
dog forest garden urban cooking bike fiber arts
  • Likes 3
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

Glenn Herbert wrote:Re Mike's advice which sounds good to me, which direction did the shed flip from? Left or right in the picture? I would attach the cables/ropes to the corners on the far side from where you want to pull it over, so that as it starts to tip the lever arm gets longer and more effective. This would also be pulling the joints of the shed together rather than apart.


To make this clear I need to show the other photo. Here you can see where it was first and where it is now:


As you see: the white plastic barrel with rainwater (from the roof) is still standing. The shed was 'hopped' over it!

My allotment garden ends just behind where the roof is now. I am glad it did not land on the garden of my allotment-neighbour! I am glad too there wasn't much growing there where it landed. If the wind was from a different direction my apple tree could have been damaged badly. Now there's only one rosemary and one lavender bush at that spot where the roof is now. And for the rest the beds were still empty (prepared with mulch/compost for coming spring).

 
Mike Haasl
steward
Posts: 15505
Location: Northern WI (zone 4)
4846
7
hunting trees books food preservation solar woodworking
  • Likes 5
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
In your area, do they sell screw anchors to tie grazing animals to or to stake trees with?  They're much smaller and affordable and might do the job for your situation.

Something like this: https://www.menards.com/main/building-materials/fencing/fencing-accessories/earth-anchor/858708/p-1530858525840-c-5764.htm?tid=-6146417395468013417&ipos=1
 
Inge Leonora-den Ouden
pollinator
Posts: 3089
Location: Meppel (Drenthe, the Netherlands)
1018
dog forest garden urban cooking bike fiber arts
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

Mike Haasl wrote:In your area, do they sell screw anchors to tie grazing animals to or to stake trees with?  They're much smaller and affordable and might do the job for your situation.

Something like this: https://www.menards.com/main/building-materials/fencing/fencing-accessories/earth-anchor/858708/p-1530858525840-c-5764.htm?tid=-6146417395468013417&ipos=1


For grazing animal? Then I'll have to look in the store for farmers. Did not yet think of that! Thank you.
 
pollinator
Posts: 5347
Location: Bendigo , Australia
477
plumbing earthworks bee building homestead greening the desert
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Some 4WD groups use a screw anchor to get out of bogged situations.
Maybe look at them at 4WD accessory places.

-sand-screw
 
Inge Leonora-den Ouden
pollinator
Posts: 3089
Location: Meppel (Drenthe, the Netherlands)
1018
dog forest garden urban cooking bike fiber arts
  • Likes 6
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Thanks all for your advice. Since yesterday the garden shed is standing right up again! Thanks to a few strong men and well-balanced women ;-)

We bought some hardwood square posts that will go into the ground (for 3/4 of the length) and large nuts-and-bolts to fix them to the corner posts of the shed. According to others who have sheds there (neighbouring allotment gardens) that is the way to do it.

If this weren't a cheap garden shed but a real Tiny House, I would have chosen for professional ground-screws (see this site: https://pnl.nl/ ).
 
Anne Miller
steward
Posts: 16058
Location: USDA Zone 8a
4272
dog hunting food preservation cooking bee greening the desert
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Thank you for the update.  I am glad that it is now a garden shed again!
 
pollinator
Posts: 814
Location: Appalachian Foothills-Zone 7
202
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator
Lol, if it is anything like my sheds, it’ll have so much stuff in it, it won’t go anywhere!
 
Inge Leonora-den Ouden
pollinator
Posts: 3089
Location: Meppel (Drenthe, the Netherlands)
1018
dog forest garden urban cooking bike fiber arts
  • Likes 1
  • Mark post as helpful
  • send pies
    Number of slices to send:
    Optional 'thank-you' note:
  • Quote
  • Report post to moderator

Gray Henon wrote:Lol, if it is anything like my sheds, it’ll have so much stuff in it, it won’t go anywhere!


This shed was not yet finished, it did not (yet) have that much stuff in it ...
 
If a tomato is a fruit, does that mean ketchup is a smoothie? What if we mix in a tiny ad?
Back the BEL - Invest in the Permaculture Bootcamp
https://permies.com/w/bel-fundraiser
reply
    Bookmark Topic Watch Topic
  • New Topic