BRK #54
Today was an enlightening one. Gardening tasks in the morning with a light crew (two boots are on vacation leave), and
gremlins seemed to have decided today was the perfect day for some mischief. Their range spread from the kitchen to the creek (where we sometimes draw water)... Had a review of The Big List of priorities with Paul today, and then wrapped-up the workday with some review and recon of junkpole fences. There were a number of them damaged from the recent storm, so we wanted to see what would be in store for us later this week when we put them back together.
(I had a weird colour filter on for these photographs. My apologies.)
In some cases, the wind buffeted the rock jacks so much that they dropped their rocks, causing the fences to blow over.
In other instances, the rock jacks weren't the problem. The beams, however, were old and worn-out. Something to keep in mind when we find materials to fabricate the new fences.
We then reviewed the design of a few successful, resilient rock jacks for inspiration. A couple general concepts to keep in mind as we build:
- The "arms" should be fastened on the inside the "legs," in most cases.
- The lower the arms/stage are to the ground, the sturdier it will be.
- The higher the legs begin on the main mast, the sturdier it will be.
- Strongly consider some additional bracing in the front area (picture below).
- If building on a drastic slope - like we will in this situation - you can consider a second or even a third stage to hold more rocks.
- Supports on the opposite side of the
fence can be helpful, provided there's no footpath or other structure(s) that would be blocked by the additional bracing.
A couple examples we compared and contrasted are below, as a reference.
Thanks for reading, and enjoy your day...!