Here is my submission for Drop 6” to 8” dead standing tree with a bow saw - PEPBB woodland.sand.deadbow:
I am providing photos of the following:
- My chosen tree to cut
- Action shot about half way through felling the tree showing my wedge/notch cut completed
- Fallen tree
- Measurement across the stump showing the diameter
I cut down this dead aspen for my neighbor. I had quite a cheering section! Every kid in the cauldesac must have lined up on the side walk. They were counting me down, man!!!
I'm pursuing SKIP to inherit property, check it out for yourself: SKIP book I love that Rocket Mass Heaters are Carbon-Nuetral. In Erica's and Ernies Art of Fire Presentation, Erica explains the chemistry of how that's possible!
At Wheaton Labs, and using a kantana handsaw, I cut down a dead tree.
The photos below show the chosen tree to cut, my wedge/notch cut completed, the fallen tree, and the measurement across the stump showing the diameter.
I used a katana blade to cut this dead standing tree.
To get certified for this BB, post pictures or video (less than 2 min) of the following:
- Your chosen tree to cut
- Action shot about half way through felling the tree showing your wedge/notch cut completed
- Fallen tree
- Measurement across the stump showing the diameter
1_dead-standing_chosen-tree.jpg
2_dead-standing_katana_wedge.JPG
3_dead-standing_katana_felled.JPG
I'm pursuing SKIP to inherit property, check it out for yourself: SKIP book I love that Rocket Mass Heaters are Carbon-Nuetral. In Erica's and Ernies Art of Fire Presentation, Erica explains the chemistry of how that's possible!