Make a sign - PEP BB dimensional.sand.sign

I was looking forward to this BB - i love wood burning. I had a hard day earlier this week and chose to make my sign one night to cheer myself up!

I used a rough piece of used pallet wood from a heat treated pallet (not chemically treated) as it fits the esthetic of my shed. I'm very happy with the results!

Burned a wood sign based on one I saw in the Hong Kong airport. Salvaged wood, basic burning stylus, tung oil.

To complete this BB, the minimum requirements are:
- At least 5" tall by 18" wide
- Some means of hanging or posting the sign
- No treated wood
- Lettering and images are burned
- Must finish with tung oil or linseed oil (or else the burned image disappears)

To document your completion of the BB, provide pics or video (<2 min) of the following:
Attachment 1 - The wood and your burning tools
Attachment 2 - The sign getting burned
Attachment 3 - The sign getting oiled (showing type of oil)
Attachment 4 - The sign meeting the minimum size
Attachment 5 - The sign hanging or posted

The sign is just over 5inches by just over 18inches. I hung the sign using hemp twine and drilling 4 holes. The wood wasn't treated but it was oiled with linseed oil.

I finished my chicken yard and it needed a name, bonus points if you can guess the book I mimicked

This board came from a cedar fence picket, trimmed down. Overall size 5.5x22.5”

I used a router to carve out the letters, burned the sign with a propane weed torch, sanded it, then put linseed oil over it.
That said, I’m wondering if linseed oil is entirely needed with this style? Would the letters still fade?

My sign was made from 2x6 #2 pine finished with Linseed Oil during the 2024 SKIP event. It’s a much larger than the minimum required length. I planned to use a propane torch but Paul’s router went missing and a wood burning iron turned out to be a better choice, anyway.  Another SKIPper made the sign “Dances” which was mounted to the same post as mine.


To complete this BB, the minimum requirements are:
- At least 5" tall by 18" wide
- Some means of hanging or posting the sign
- No treated wood
- Lettering and images are burned
- Must finish with tung oil or linseed oil (or else the burned image disappears)

To document your completion of the BB, provide pics or video (<2 min) of the following:
- The wood and your burning tools
- The sign getting burned
- The sign getting oiled (showing type of oil)
- The sign meeting the minimum size
- The sign hanging or posted

Used this as a two-fer with community living. Branded my relaxation spot in my backyard as Paradise Pavillion.
Added some artwork of birds to fancy it up a bit.

To document your completion of the BB, provide pics or video (<2 min) of the following:
- The wood and your burning tools
- The sign getting burned
- The sign getting oiled (showing type of oil)
- The sign meeting the minimum size
- The sign hanging or posted

Here’s a sign I made for our patio. The dimensions are 5 1/2 inches by a little less than 20 inches. I used a woodburning tool and linseed oil. To install I used two hooks fastened to the back.