Compound mallet - PEP BB roundwood.sand.compoundmallet

Howdy, Skippers! Good day to build a compound mallet day, eh? I used a dry walnut branch for the handle, and a wet spruce trunk for the head. Wish I had hard wood for the head, but alas! Spruce will work. How long will it take to dry? When is a good time to start using it?

I made a mini bonk stick what for bonkin.  Check er out

This mallet was surprisingly challenging, probably because I started late in the day.

First, I picked a log and stripped it.  Then I started looking for a handle - I was all sorts of out of order but I learned a lot about woodworking. I wanted a strong mallet, so I picked knotty wood.  And then I (over 2 hours) put it together. . . And it broke.  So I threw a fit. Walked away, got some dinner, then talked to someone who suggested instead of starting over, we pound out the broken handle and start a new handle.   Unfortunately, I didn't get a picture at this point!  So my before handle is different than my after handle.  But I did replace the handle and it works much better!  My intention is to give this to my son - which is why the handle is a little small for my hands.

I really enjoyed making a compound mallet; it was surprisingly easy once you have the correct tools!

Attachment 1 - Your chunks of wood that you are starting with (one is clearly green and the other dry)
Attachment 2  - Progress about half way through, with the hand tools you have decided to use for this
Attachment 3  - Final product held in your hand showing that your thumb and first finger can touch (any fatter than that and your hand will get very tired using it)

Using two pieces of wood- one pine piece green for mallet head and one older larch branch for the handle- I made a compound mallet at Wheaton Labs for the SKIP program. I look forward to making this again at home and smashing things up! Yeah!!

Compound mallet!
This was a fun one, I’ve needed a mallet for chisel work.

Thank you, Paul, for having an incredible collection of cool tools!!

Made a compound mallet tonight!

I'm not sure what kind of wood I found my best guess is some kind of Elm.

bb submission

Made the head of this mallet out of a dogwood limb that was broken by a another tree falling on it, wood is still green with a couple weak sprouts. I was hoping pruning it off with a clean cut will help it heal over but sadly on closer inspection I think the tree is on its way out. Next I cut out a segment to be the mallet head and took the bark off at the shaving horse and chamfered the faces. I have some billets of wood stored away for making handles that are all well seasoned by this point, I selected a pretty much ready to go piece of what I think is hickory. Bored the hole with a scotch-eyed auger and then made it into an oval to fit the handle with a small array of gouges. Once the handle was driven into the head I cut it flush with the hatchet and reshape the head to take off some of the twist. I rubbed old lard over the faces to slow down uneven drying in hopes of reducing checking. Made another one piece mallet with the rest of the limb. I really like dogwood for these sorts of things, it's dense and heavy but with a tight smooth grain that resists wear. Good for more refined uses too but is much harder to work once dried.  

Green ash head and dry apple handle, this turned out very crude mainly because the handle had to be chiseled to fit through